Gateway Alarm Enable; Malicious Call Alarm Enable - Cisco MCS-7825-H3-IPC1 Service Manual

Chapter 7 Cisco Management Information Base

Gateway Alarm Enable

ccmGatewayAlarmEnable OBJECT-TYPE

Malicious Call Alarm Enable

ccmMaliciousCallAlarmEnable OBJECT-TYPE
OL-22523-01
The time duration for storing each entry in the ccmPhoneStatusUpdateTable. The entries that have
been kept at least this period will be deleted. This value should ideally be set to a higher value than
the ccmPhoneStatusUpdateAlarmInterv object.
DEFVAL { 1800 }
::= { ccmAlarmConfigInfo 5 }
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Allows the generation of alarms in response to Gateway general failures that the Cisco Unified CM
is aware of.
true(1): Enabling this object will allow the Cisco Unified CM agent to generate the following
alarms:
ccmGatewayFailedReason
ccmGatewayLayer2Change (This is the default value.)
false(2): Disabling this object will stop the generation of the following alarms by the Cisco Unified
agent:
ccmGatewayFailed
ccmGatewayLayer2Change.
DEFVAL { true }
::= { ccmAlarmConfigInfo 6 }
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Allows the generation of alarms for malicious calls that the local call manager is aware of.
true(1): Enabling this object will allow the Cisco Unified CM agent to generate the
ccmMaliciousCall alarm. This is the default value.
false(2): Disabling this object will stop the generation of the ccmMaliciousCall alarm.
DEFVAL { true }
::= { ccmAlarmConfigInfo 7 }
Cisco Unified Communications Manager Managed Services Guide
CISCO-CCM-MIB
7-69