Failedtoreadconfig - Cisco MCS-7825-H3-IPC1 Service Manual

Managed services guide
Table of Contents

Advertisement

Chapter 6
Cisco Unified Serviceability Alarms and CiscoLog Messages
Error-Level Alarms
temporarily cannot generate a response; a 505 indicates that the HTTP version number included in the
call routing request from Unified CM is not supported. Other such errors may be responsible; please
refer to generally available guidelines on HTTP or check the RFC 2616 for detailed explanations about
HTTP Status Code definitions.
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
ERROR
Routing List
SDL
SDI
Sys Log
Event Log
Parameter(s)
Policy Decision Point(String)
The status code and reason phrase for the failure(String)
Recommended Action
If a 4xx response caused the alarm, verify that the PDP has been accurately configured for the
functionality and call routing that you expect it to perform. If a 500 response causes the alarm, check
whether the PDP service is active and check the PDP server's log files for any errors. If a 503 causes the
alarm, the PDP may be overloaded by requests. Take appropriate action to reduce the load on the PDP
by following some or all of these recommendations: 1) consider adding more PDPs and provisioning
Unified CM with additional call intercept profiles and call intercept trigger points in the various
configuration pages under the Call Routing menu in Cisco Unified CM Administration; 2) provision a
pair of policy servers per call-intercept profile to enable load balancing; or 3) verify that the PDP server
in your deployment meets or exceed the hardware requirements specified in the documentation for Cisco
Enterprise Policy Manager (CEPM) or the third-party PDP solution you have deployed. If a 505 response
causes the alarm, check to be sure that the PDP supports HTTP version 1.1.

FailedToReadConfig

Service Manager failed to read configuration file.
Facility/Sub-Facility
CCM_SERVICEMANAGER-GENERIC
Cisco Unified Serviceability Alarm Definition Catalog
System/Service Manager
Severity
Error (3)
Cisco Unified Communications Manager Managed Services Guide
6-159
OL-22523-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unified communications manager 8.5(1)

Table of Contents