Deviceinittimeout; Dirsyncschedulerfailedtoupdatenextexectime - Cisco MCS-7825-H3-IPC1 Service Manual

Error-Level Alarms
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Error (3)
Parameters
Total Events Received [UInt] IP Address [String] TCP Handle [String] Max Events Allowed [UInt]
Number Of Skinny Device Throttled [UInt]
Recommended Action
Check the CCM trace data for the indicated SCCP device to determine the reason for the high number
of events. Confirm that the value configured in the Cisco CallManager service parameter, Max Events
Allowed, is a suitable number for your deployment.

DeviceInitTimeout

Device initialization timeout occurred. This alarm does not occur under normal working conditions; it
will only occur if a device fails to respond to an initialize request.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Error (3)
Parameters
Device Name [String] Protocol [String] Side Number [UInt]
Recommended Action
Investigate the identified device.

DirSyncSchedulerFailedToUpdateNextExecTime

Scheduler failed to update next execution time.
Facility/Sub-Facility
CCM_JAVA_APPS-TOMCATAPPLICATIONS
Cisco Unified Serviceability Alarm Definition Catalog
System/Java Applications
Severity
Error (3)
Cisco Unified Communications Manager Managed Services Guide
6-124
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
OL-22523-01