Cisco MCS-7825-H3-IPC1 Service Manual page 69

Chapter 2 New and Changed Information
Alarm Name
EMCCFailedInRemoteCluster
EMCCUserLoggedIn
EMCCUserLoggedOut
EMServiceConnectionError
NodeNotTrusted
UserInputFailure
•
Alarm Name
ConfigThreadChangeNotifyServerSingleFailed
ConfigThreadReadConfigurationFailed
DefaultDurationInCacheModified
ITLFileRegenerated
RollBackToPre8.0Disabled
SDIControlLayerFailed
TVSCertificateRegenerated
TVSServerListenBindFailed
TVSServerListenSetSockOptFailed
•
OL-22523-01
Description
There was an EMCC login failure at a remote Unified CM.
EMCC login could fail due to the following reasons:
• User does not exist in any of the configured remote cluster.
• User is not enabled for EMCC.
• No free EMCC base device.
• EMCC access was prevented by remote cluster.
Untrusted certificate received from the remote end while
•
trying to establish a connection.
EMCC login was successful. Severity level is Informational(6).
EMCC logout was successful. Severity level is
Informational(6).
EM Service not reachable. EM Service might be down in one
or more nodes in the cluster. Severity level is Error.
Untrusted Node was contacted. Severity level is Error.
EMCC login failure due to invalid user input due to invalid user
credentials or the credentials have expired. Severity level is
W
arning(4).
TVS Alarm Catalog—The following new TVS alarms are added in the alarm catalog:
Description
Failed to allocate resources to handle
configuration change notification from database.
Failed to retrieve enterprise parameter values
from database at TVS service startup.
Default value of a Certificate duration in cache is
modified in the Service Parameter page.
New ITL File has been generated.
Roll Back to Pre 8.0 has been disabled in the
Enterprise Parameter page.
Failed to update trace logging or alarm subsystem
for new settings.
TVS Server certificate has been regenerated.
Fail to connect to the network port through which
file requests are received.
Failed to increase the size of the network buffer
for receiving file requests.
Call Manager Catalog—The following new Call Manager alarms are added in the alarm catalog:
Cisco Unified Communications Manager, Release 8.0(1)
Cisco Unified Communications Manager Managed Services Guide
2-27