Memallocfailed - Cisco MCS-7825-H3-IPC1 Service Manual

Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
CM database and suppose the Publisher goes down. Because the Subscriber may not be able to write to
the database the devices may still display as registered in Unified CM Administration after they are
unregistered. However, if the Publisher is down that should generate another alarm with higher priority
than this alarm. If the device is not registered, click on the name of that particular device and check the
type of the device.
Device types including Cisco Conference Bridge Software, Cisco Media Termination Point Software, or
that specify a server name that is the same name as a Unified CM node of the cluster indicate that the
requested device is a software device and is part of the Cisco IP Voice Media Streaming application.
Check to be sure that the IP Voice Media Streaming App service is enabled on that Unified CM node
(Cisco Unified Serviceability > Tools > Service Activation) and if it is not enabled, activate the Cisco IP
Voice Media Streaming App service. Devices should try to register. You can also check the status of the
service to be sure it is showing as Started (Tools > Control Center > Feature Services). If the device type
is a type other than Cisco Conference Bridge Software, Cisco Media Termination Point Software, or a
server name that is the same name as a Unified CM node, that indicates that the device is an external
media resource to Unified CM.
Check the configuration (such as Conference Bridge type, MAC address, and conference bridge name in
the case of a conference bridge; Media Termination Point name in the case of a Media Termination Point;
Transcoder type, MAC address, and Transcoder name in the case of a Transcoder) of the device in Cisco
Unified CM Administration and compare it with the configuration of the actual device. To check the
configuration of the actual device you may need to refer to the user manual of the media device.
The user manual should provide all the details such as connecting to the media device to check the
configuration, commands needed to view and update the configuration, and so on. If configuration in
Unified CM and on the actual devices are different, make the necessary changes so that the
configurations match. If the configuration matches and the device is still not registered, restart the
external media device or the service associated with the external media device. If the external media
device continues to fail to register with Unified CM, check the network connectivity between Unified
CM and the media device.

MemAllocFailed

CMI tried to allocate memory and failed.
Cisco Unified Communications Manager tried to read the Cisco Messaging Interface service parameters
but not enough memory was allocated for the task and so the information could not be read.
History
Cisco Unified Communications
Release
7.0(1)
Cisco Unified Serviceability Alarm Definition Catalog
CMIAlarmCatalog/CMI
Severity
WARNING
Routing List
Event Log
OL-22523-01
Action
Added to CallManager Catalog.
Cisco Unified Communications Manager Managed Services Guide
Warning-Level Alarms
6-269