Csesyslogservertable - Cisco MCS-7825-H3-IPC1 Service Manual

CISCO-SYSLOG-EXT-MIB
cseSyslogFileLoggingDisable OBJECT-TYPE
cseSyslogServerTableMaxEntries OBJECT-TYPE

cseSyslogServerTable

cseSyslogServerTable OBJECT-TYPE
cseSyslogServerEntry OBJECT-TYPE
Cisco Unified Communications Manager Managed Services Guide
7-156
::= { cseSyslogConfigurationGroup 4 }
SYNTAX Integer { true (1), noOp (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Indicates whether the Syslog messages should be sent to the file indicated by
cseSyslogLogFileName. Once this object is set to 'true', the Syslog messages are no longer sent to
the file. The value of 'cseSyslogLogFileName' is set to zero length string. To restart the file logging,
the cseSyslogLogFileName should be set to a valid file name.
No action is taken if this object is set to 'noOp'. The value of the object when read is always 'noOp'.
::= { cseSyslogConfigurationGroup 5 }
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The maximum number of entries that the agent supports in the cseSyslogServerTable.
::= { cseSyslogConfigurationGroup 6 }
SYNTAX Sequence of CseSyslogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
This table contains all the Syslog servers which are configured.
::= { cseSyslogConfigurationGroup 7 }
SYNTAX CseSyslogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
An entry containing information about a Syslog server.
INDEX { cseSyslogServerIndex}
::= { cseSyslogServerTable 1 }
CseSyslogServerEntry ::=
Chapter 7 Cisco Management Information Base
OL-22523-01