Cisco Mgcp T1 Cas Device - Cisco MCS-7825-H3-IPC1 Service Manual

Chapter 5 Cisco Unified Real-Time Monitoring Tool Tracing, PerfMon Counters, and Alerts
Table 5-25 Cisco MGCP PRI Device (continued)
Counters
Channel 1 Status through Channel 15
Status (consecutively numbered)
Channel 16 Status
Channel 17 Status through Channel 31
Status (consecutively numbered)
DatalinkInService
OutboundBusyAttempts

Cisco MGCP T1 CAS Device

The Cisco MGCP T1 Channel Associated Signaling (CAS) Device object provides information about
registered Cisco MGCP T1 CAS devices.
device counters.
Table 5-26 Cisco MGCP T1 CAS Device
Counters
CallsActive
CallsCompleted
Channel 1 Status through Channel 24
Status (consecutively numbered)
OutboundBusyAttempts
OL-22523-01
Counter Description
This counter represents the status of the indicated B-Channel that is associated
with a MGCP PRI device. Possible values: 0 (Unknown) indicates that the status
of the channel could not be determined; 1 (Out of service) indicates that this
channel is not available for use; 2 (Idle) indicates that this channel has no active
call and is ready for use; 3 (Busy) indicates that an active call exists on this
channel; 4 (Reserved) indicates that this channel has been reserved for use as a
D-Channel or for use as a Synch-Channel for E-1.
This counter represents the status of the indicated B-Channel that is associated
with a MGCP PRI Device. Possible values: 0-Unknown, 1-Out of service, 2-Idle,
3-Busy, 4-Reserved, for an E1 PRI Interface, this channel is reserved for use as a
D-Channel.
This counter represents the status of the indicated B-Channel that is associated
with the MGCP PRI Device. 0-Unknown, 1-Out of service, 2-Idle, 3-Busy,
4-Reserved.
This counter represents the state of the Data Link (D-Channel) on the
corresponding digital access gateway. This value will get set to 1 (one) if the Data
Link is up (in service) or 0 (zero) if the Data Link is down (out of service).
This counter represents the total number of times that a call through an MGCP
PRI device was attempted when no voice channels were available.
Table 5-26
Counter Description
This counter represents the number of calls that are currently active (in use) on
this MGCP T1 CAS device.
This counter represents the total number of successful calls that were made from
this MGCP T1 CAS device.
This counter represents the status of the indicated B-Channel that is associated
with an MGCP T1 CAS device. Possible values: 0 (Unknown) indicates the status
of the channel could not be determined; 1 (Out of service) indicates that this
channel is not available for use; 2 (Idle) indicates that this channel has no active
call and is ready for use; 3 (Busy) indicates that an active call exists on this
channel; 4 (Reserved) indicates that this channel has been reserved for use as a
D-Channel or for use as a Synch-Channel for E-1.
This counter represents the total number of times that a call through the MGCP
T1 CAS device was attempted when no voice channels were available.
Cisco Unified Communications Manager Managed Services Guide
Performance Monitoring in RTMT
contains information on Cisco MGCP TI CAS
5-31