Using Dmpdm; Using One-Click Options For A Dmp Display; Viewing The Assigned Dmp Ip Address - Cisco Digital Media Player User Manual

Using DMPDM

Revised May 17, 2007
This chapter explains how to use DMPDM to configure and manage one DMP device in isolation and
describes elements that you see in the DMPDM graphical user interface (GUI). Topics are organized in
these sections:
•
•
•
•
•
•
•

Using One-Click Options for a DMP Display

The following topics tell you how and why to use the Show IP, Video, and Browser buttons in the
DMPDM "DMP Mode" area:
•
•
•

Viewing the Assigned DMP IP Address

To see on your DMP display the specific IP address that your DMP received from the DHCP server,
click
Digital Media Player 4300G to learn how to connect and set up your DMP.
If your DHCP server changes the IP address assignment for a centrally managed DMP while the DMP
Note
is running, instead of waiting for the DMP to restart, you must restart the DMP. Otherwise, you cannot
use DMM-DSM to centrally manage that DMP.
OL-12472-01
Using One-Click Options for a DMP Display, page 2-1
Configuring Settings, page 2-2
Selecting the Content to Show, page 2-10
Using Administrative Options, page 2-17
Common Scenarios for Using DMPDM, page 2-20
Viewing the DMPDM 'About Box', page 2-21
Viewing the DMP Device License Number, page 2-21
Viewing the Assigned DMP IP Address, page 2-1
Viewing Video Content in Full-Screen Mode, page 2-2
Viewing HTML Content in Full-Screen Mode, page 2-2
. If you have not yet obtained an IP address for your DMP, see Quick Start Guide for Cisco
C H A P T E R
User Guide for Cisco Digital Media Player Device Manager 1.0
2
2-1