Syslog Configuration Group - Cisco MCS-7825-H3-IPC1 Service Manual

Chapter 7 Cisco Management Information Base

Syslog Configuration Group

This group provides the System log (Syslog) configuration options.
cseSyslogConsoleEnable OBJECT-TYPE
cseSyslogConsoleMsgSeverity OBJECT-TYPE
cseSyslogLogFileName OBJECT-TYPE
cseSyslogLogFileMsgSeverity OBJECT-TYPE
OL-22523-01
(1240),-- AAA Daemon tacacsd (1248),
fc2d (1320),-- FC2 Daemon lcohmsd (1336),
Statistics, featureMgr (1360), -- Feature Manager lttd (1376) -- LTT Daemon }
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Indicate whether the Syslog messages should be sent to the console.
DEFVAL { false }
::= { cseSyslogConfigurationGroup 1 }
SYNTAX SyslogSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Minimum severity of the message that are sent to the Console.
DEFVAL { debug }
::= { cseSyslogConfigurationGroup 2 }
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Name of file to which the Syslog messages are logged. Set operation with a zero length will fail.
DEFVAL { "messages" }
::= { cseSyslogConfigurationGroup 3 }
SYNTAX SyslogSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Minimum severity of the message that are sent to the log file (cseSyslogLogFileName).
DEFVAL { debug }
-- TACACS Daemon radiusd (1256),
-- LC Ohms Daemon ficonStat (1352), -- FICON
Cisco Unified Communications Manager Managed Services Guide
CISCO-SYSLOG-EXT-MIB
-- Radius Daemon
7-155