Mibs And Mcs Types; Using Command Line Interface - Cisco MCS-7825-H3-IPC1 Service Manual

Platform Monitoring
You configure SNMP in the network management applications to receive SNMP traps, notifications, and
informs listed in the MIBs. Specific MIB support varies by Cisco Unified CM release and hardware
vendor.

MIBs and MCS Types

There are no specific OIDs available to directly give the MCS type. In the case of Linux appliances, the
value of sysObjectID can be mapped to the server types. For instance sysobjectID returns
1.3.6.1.4.1.9.1.583 for a HP-7825 server.
In the case of Windows, there are no such specific values returned for server types except for OID does
identify the server as a Windows server. Refer to
http://www.oidview.com/mibs/9/CISCO-PRODUCTS-MIB.html
different hardware.
For Media Convergence Server (MCS) MIBs supported by Cisco Unified CM releases, go to this
URL—http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/cmmibcmp.xls.

Using Command Line Interface

System BIOS is viewable during the server boot sequence. The following commands are useful to view
details about hardware, BIOS, RAID, and firmware. These items are included as part of the Cisco
Unified CM image and do not need to be managed separately as in Cisco Unified CM Release 4.x, but
may need to be inspected during diagnostic activity.
show hardware
show environment [fans | power-supply | temperature]
show tech all
utils create report hardware
You can also use the admin:utils fior status CLI to isolate which process causes high IOwait. Other
available options to use with the admin:utils fior command are—enable, disable, start, stop, list, top. For
example, at the command prompt type admin:utils fior list. This displays:
2007-05-31
Time
17:02:45
17:04:51
17:04:56
17:10:22
17:21:17
17:44:34
17:44:51
17:45:09
17:45:25
17:45:31
Cisco Unified Communications Manager Managed Services Guide
3-28
Chapter 3
CPQ-xxx-MIB (HP)
–
CPQHEALTH (HP)
–
INTEL-SERVER-BASEBOARD6 (Introduced in Cisco Unified CM Release 7.1[2])
–
Counters Reset
Process PID
rpmq 31206
java 31147
snmpget 31365
top 12516
java 31485
java 1194
java 1231
cdpd 6145
java 1319
java 1330
Managing and Monitoring the Health of Cisco Unified Communications Manager Systems
State Bytes Read Bytes Written
Done 14173728 0
Done 310724 3582
Done 989543 0
Done 7983360 0
Done 313202 2209
Done 92483 0
Done 192291 0
Done 0 2430100
Done 192291 0
Done 192291 0
for list of sysObjectIDs assigned to
OL-22523-01