Codeyellowexit; Credreadfailure - Cisco MCS-7825-H3-IPC1 Service Manual

Notice-Level Alarms
Parameters
Message(String)
Recommended Action
Regenerate the certificate that is about to expire by accessing the Cisco Unified Operating System and
go to Certificate Management. If the certificate is issued by a CA, generate a CSR, submit the CSR to
CA, obtain a fresh certificate from CA, and upload it to Cisco Unified CM.

CodeYellowExit

CodeYellowExit. Unified CM has ceased throttling calls and has exited the Code Yellow state.
History
Cisco Unified Communications
Release
8.0(1)
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Notice
Parameters
Expected Average Delay [UInt] Entry Latency [UInt] Exit Latency [UInt] Sample Size [UInt] Time
Spent in Code Yellow [UInt] Number of Calls Rejected Due to Call Throttling [UInt] Total Code Yellow
Exit [UInt]
Recommended Action
None

credReadFailure

Error occurred attempting to read a credential in the database. This could be a network or database issue.
History
Cisco Unified Communications
Release
7.0(1)
8.0(1)
Cisco Unified Communications Manager Managed Services Guide
6-304
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Action
Severity changed from Error to Notice.
Action
Error message added.
Changed severity level to Notice from Informational.Corrected
parameter and added Routing List element.
OL-22523-01