CISCO-CCM-MIB
CcmDeviceLineStatus ::= TEXTUAL-CONVENTION
CcmSIPTransportProtocolType ::= TEXTUAL-CONVENTION
Objects
ciscoCcmMIBObjects OBJECT IDENTIFIER ::= { ciscoCcmMIB 1 }
ccmGeneralInfo OBJECT IDENTIFIER ::= { ciscoCcmMIBObjects 1 }
ccmPhoneInfo OBJECT IDENTIFIER ::= { ciscoCcmMIBObjects 2 }
ccmGatewayInfo OBJECT IDENTIFIER ::= { ciscoCcmMIBObjects 3 }
ccmGatewayTrunkInfo OBJECT IDENTIFIER ::= { ciscoCcmMIBObjects 4 }
ccmGlobalInfo OBJECT IDENTIFIER ::= { ciscoCcmMIBObjects 5 }
ccmMediaDeviceInfo OBJECT IDENTIFIER ::= { ciscoCcmMIBObjects 6 }
ccmGatekeeperInfo OBJECT IDENTIFIER ::= { ciscoCcmMIBObjects 7 }
ccmCTIDeviceInfo OBJECT IDENTIFIER ::= { ciscoCcmMIBObjects 8 }
Cisco Unified Communications Manager Managed Services Guide
7-20
This syntax is used to identify the protocol between phone and Cisco Unified CM. The protocols are
as follows:
–
unknown—The phone protocol is unknown
sccp—The phone protocol is SCCP
–
sip—The phone protocol is SIP
–
SYNTAX INTEGER { unknown(1), sccp (2), sip(3) }
STATUS current
DESCRIPTION
This syntax is used to identify the registration status of a line of the device with the local Cisco
Unified CM. The status is as follows:
unknown—The registration status of the device line is unknown
–
registered—The device line has successfully registered with the local Cisco Unified CM.
–
unregistered—The device line is no longer registered with the local Cisco Unified CM.
–
rejected—Registration request from the device line was rejected by the local Cisco Unified CM.
–
SYNTAX INTEGER { unknown (1), registered(2), unregistered (3), rejected (4)}
STATUS current
DESCRIPTION
This textual convention defines the possible transport protocol types that are used for setting up SIP
calls unknown. The possible transport types are:
–
unknown—The SIP Trunk transport type is unknown
–
tcp—The SIP Trunk transport type is tcp
–
udp—The SIP Trunk transport type is udp
tcpAndUdp—The SIP Trunk transport type is tcp and udp
–
tls—Applicable only for InTransportProtocolType is tls. The SIP Trunk transport type is tls.
–
SYNTAX INTEGER { unknown(1), tcp(2), udp(3), tcpAndUdp (4), tls(5) }
Chapter 7
Cisco Management Information Base
OL-22523-01