Ris Data Collector Perfmonlog - Cisco MCS-7825-H3-IPC1 Service Manual

Chapter 3 Managing and Monitoring the Health of Cisco Unified Communications Manager Systems

RIS Data Collector PerfMonLog

In Cisco Unified CM Release 5.x, the RIS Data Collector PerfMonLog file is not enabled by default. It
is recommended that RIS Data Collector PerfMonLog is enabled to assist in troubleshooting. It tracks
CPU, memory, disk, and the network. If you enable RIS Data Collector PerfMonLog, then you can
disable AMC PerfMonLog. In Cisco Unified CM Release 6.x, RIS Data Collector PerfMonLog replaced
AMC PerfMonLog.
With RIS Data Collector PerfMonLog enabled, the impact on the CPU is small, around 1%.
Note
Use RTMT Trace and Log Center to download Cisco RIS Data Collector PerfMonLog files for the time
period that you are interested in. Open the log file using Windows Perfmon Viewer (or RTMT Perfmon
viewer), then add Performance counters of interest such as:
•
•
•
•
Figure 3-9
Figure 3-9
OL-22523-01
CPU usage > Processor or Process % CPU
Memory usage > Memory %VM Used
Disk usage > Partition % Used
Call Processing > Cisco CallManager CallsActive
shows the output of the Windows Perfmon Viewer.
Windows Perfmon Viewer
RTMT Monitoring of Cisco Unified CM System Health
Cisco Unified Communications Manager Managed Services Guide
3-23