Cisco MCS-7825-H3-IPC1 Service Manual page 755

Chapter 7 Cisco Management Information Base
Table 7-5
Trap
ccmPhoneStatusUpdate
ccmPhoneFailed
MediaResourceListExhausted
OL-22523-01
How to Check CISCO-CCM-MIB SNMP Traps
Cisco Unified Communications Manager Managed Services Guide
Verification Procedure
1. Set MaxSeverity=Info in
CiscoSyslog->dogBasic MIB table.
Set PhoneStatusUpdateAlarmInterv=30 or
2.
higher in ccmAlarmConfigInfo MIB table.
Disconnect a Cisco Unified CM server that
3.
your phones point to.
Phones will unregister.
4.
Connect the Cisco Unified CM server again.
5.
Phones will re-register.
6.
Check that the ccmPhoneStatusUpdate trap is
7.
generated.
1. Set MaxSeverity=Info in
CiscoSyslog->clogBasic MIB table.
Set PhoneFailedAlarmInterv=30 or higher in
2.
ccmAlarmConfigInfo MIB table.
Make a phone fail. Delete a phone Cisco
3.
Unified Communications Manager
Administration and register the phone again.
Check that the ccmPhoneFailed trap is
4.
generated.
Create a Media Resource Group (MRG) that
1.
contains one of the standard Conference
Bridge resources (CFB-2).
2. Create a Media Resource Group List (MRGL)
that contains the MRG just created.
3. In the Phone Configuration window (for
actual phones), set MRGL as the phone
Media Resource Group List.
Stop the IPVMS, which makes the
4.
Conference Bridge resource(CFB-2) stop
working.
If you make conference calls with phones that
5.
use the media list, you will see "No
Conference Bridge available" in the phone
screen.
6. Check that a MediaListExhausted
Alarm/Alert/Trap is generated
CISCO-CCM-MIB
7-113