Sipstopped - Cisco MCS-7825-H3-IPC1 Service Manual

Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Parameters
Message(String)
Recommended Action
Perform sync manually or wait till next scheduled next sync.

SIPStopped

Cisco CallManager is not ready to handle calls for the indicated SIP device. Possible reasons could be
internal database error, the SIP device is not activated on this node, the SIP device failed to register or
the SIP device was deleted from admin page.
History
Cisco Unified Communications
Release
8.0(1)
7.0(1)
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Warning (4)
Parameters
Device Name. [String] IP Address [String] Device type. [Optional] [Enum]Device description
[Optional]. [String] Incoming Port Number. [UInt] Outgoing Port Number. [UInt] Incoming Transport
Type [Enum]Outgoing Transport Type [Enum]IPV6Address [Optional]. [String]
Enum Definitions for DeviceType
131—SIP_TRUNK
Enum Definitions for InTransportType
Code
1
2
3
4
OL-22523-01
Action
Enum Definitions for InTransportType and OutTransportType are
updated.
Recommended Action changed.
IPV6Address parameter added.
Definition
TCP
UDP
TLS
TCP/UDP
Cisco Unified Communications Manager Managed Services Guide
Warning-Level Alarms
6-281