Cisco MCS-7825-H3-IPC1 Service Manual page 868

RFC1213-MIB (MIB-II)
SEQUENCE { egpNeighState INTEGER, egpNeighAddr IpAddress, egpNeighAs INTEGER,
egpNeighInMsgs Counter, egpNeighInErrs Counter, egpNeighOutMsgs Counter, egpNeighOutErrs
Counter, egpNeighInErrMsgs Counter, egpNeighOutErrMsgs Counter, egpNeighStateUps Counter,
egpNeighStateDowns Counter, egpNeighIntervalHello INTEGER, egpNeighIntervalPoll
INTEGER, egpNeighMode INTEGER, egpNeighEventTrigger INTEGER }
egpNeighState OBJECT-TYPE
SYNTAX Integer { idle(1), acquisition(2), down(3), up(4), cease(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
The EGP state of the local system with respect to the entry EGP neighbor. Each EGP state is
represented by a value that is one greater than the numerical value associated with said state in RFC
904.
::= { egpNeighEntry 1 }
egpNeighAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
The IP address of this entry's EGP neighbor.
::= { egpNeighEntry 2 }
egpNeighAs OBJECT-TYPE
SYNTAX Integer
ACCESS read-only
STATUS mandatory
DESCRIPTION
The autonomous system of this EGP peer. Zero should be specified if the autonomous system
number of the neighbor is not yet known.
::= { egpNeighEntry 3 }
egpNeighInMsgs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
The number of EGP messages received without error from this EGP peer.
::= { egpNeighEntry 4 }
egpNeighInErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
Cisco Unified Communications Manager Managed Services Guide
8-64
Chapter 8 Industry-Standard Management Information Base
OL-22523-01