Criticalservicedown; Hardwarefailure - Cisco MCS-7825-H3-IPC1 Service Manual

Preconfigured System Alarm Notifications
Table 6-6
Value
Schedule
Enable E-mail
Trigger Alert Action Default

CriticalServiceDown

The CriticalServiceDown alert gets generated when the service status equals down (not for other states).
Table 6-7
Table 6-7
Value
Enable Alert
Severity
Enable/Disable this
alert on the
following servers
Threshold
Duration
Frequency
Schedule
Trace download
Parameters
Enable E-mail
Trigger Alert Action Default

HardwareFailure

This alert occurs when a hardware failure event (disk drive failure, power supply failure, and others)
triggers.
Table 6-8
Table 6-8
Value
Enable Alert
Severity
Cisco Unified Communications Manager Managed Services Guide
6-22
Default Configuration for the CpuPegging RTMT Alert (continued)
Default Configuration
24 hours daily
Selected
provides the default configuration for the CriticalServiceDown RTMT Alert.
Default Configuration for the CriticalServiceDown RTMT Alert
Default Configuration
Selected
Critical
Enabled on listed servers
Trigger alert when following condition met:
Service status is DOWN
Trigger alert immediately
Trigger alert on every poll
24 hours daily
Enable Trace Download not selected
Selected
provides the default configuration for the HardwareFailure RTMT Alert.
Default Configuration for the HardwareFailure RTMT Alert
Default Configuration
Selected
Critical
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
OL-22523-01