Units Of Conformance - Cisco MCS-7825-H3-IPC1 Service Manual

Chapter 8 Industry-Standard Management Information Base

Units of Conformance

ifGeneralInformationGroupOBJECT-GROUP
The following five groups are mutually exclusive; at most one of these groups is implemented for any
Note
interface.
•
ifHCFixedLengthGroupOBJECT-GROUP
OL-22523-01
MIN-ACCESS read-only
DESCRIPTION
Write access is not required.
OBJECT ifAdminStatus
SYNTAX INTEGER { up(1), down(2) }
MIN-ACCESS read-only
DESCRIPTION
Write access is not required, nor is support for the value testing(3).
OBJECT ifAlias
MIN-ACCESS read-only
DESCRIPTION
Write access is not required.
::= { ifCompliances 3 }
OBJECTS { ifIndex, ifDescr, ifType, ifSpeed, ifPhysAddress, ifAdminStatus, ifOperStatus,
ifLastChange, ifLinkUpDownTrapEnable, ifConnectorPresent, ifHighSpeed, ifName, ifNumber,
ifAlias, ifTableLastChange }
STATUS current
DESCRIPTION
A collection of objects providing information applicable to all network interfaces.
::= { ifGroups 10 }
ifFixedLengthGroupOBJECT-GROUP
OBJECTS { ifInOctets, ifOutOctets, ifInUnknownProtos, ifInErrors, ifOutErrors }
STATUS current
DESCRIPTION
A collection of objects providing information specific to non-high speed (non-high speed interfaces
transmit and receive at speeds less than or equal to 20,000,000 bits/second) character-oriented or
fixed-length-transmission network interfaces.
::= { ifGroups 2 }
OBJECTS { ifHCInOctets, ifHCOutOctets, ifInOctets, ifOutOctets, ifInUnknownProtos, ifInErrors,
ifOutErrors }
STATUS current
Cisco Unified Communications Manager Managed Services Guide
IF-MIB
8-127