Recovery, Hardware Migration, and Backup/Restore
•
•
•
•
You can search for the above patterns to find hardware failure events in syslog.
For information on alarm configuration, refer to the Alarm Configuration section of the Cisco Unified
Serviceability Administration Guide at
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/5_1_3/ccmsrva/saalarm.html
RTMT Alerts as Syslog Messages and Traps
RTMT alerts can be sent to a remote syslog server. To send to a local and remote syslog server, configure
the AMC alarm in Cisco Unified Serviceability.
Figure 3-12
Recovery, Hardware Migration, and Backup/Restore
The following topics are described in this section:
•
•
Backup/Restore
Cisco provides the following backup/restore utilities:
•
•
•
Cisco Unified Communications Manager Managed Services Guide
3-26
Chapter 3
*cma*[?????]:*
*hp*[???]:*
*hp*[????]:*
*hp*[?????]:*
Local and Remote Syslog Configuration
Backup/Restore, page 3-26
Platform Monitoring, page 3-27
Cisco Unified CM Release 4.x uses the Backup and Restore System (BARS) application
Cisco Unified CM Release 5.x uses the Disaster Recovery Framework (DRF)
Cisco Unified CM Release 6.x uses the Disaster Recovery System (DRS), essentially a renaming of
DRF above
Managing and Monitoring the Health of Cisco Unified Communications Manager Systems
Figure 3-12
shows the window.
OL-22523-01