Cisco MCS-7825-H3-IPC1 Service Manual page 778

CISCO-CDP-MIB
::= { cdpCacheEntry 11 }
cdpCacheDuplex OBJECT-TYPE
SYNTAX INTEGER { unknown(1), halfduplex(2), fullduplex(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The remote device interface duplex mode, as reported in the most recent CDP message. The value
unknown(1) indicates no duplex mode field (TLV) was reported in the most recent CDP message.
::= { cdpCacheEntry 12 }
cdpCacheApplianceID OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The remote device Appliance ID, as reported in the most recent CDP message. This object is not
instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP
message.
::= { cdpCacheEntry 13 }
cdpCacheVlanID OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The remote device VoIP VLAN ID, as reported in the most recent CDP message. This object is not
instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP
message.
::= { cdpCacheEntry 14 }
cdpCachePowerConsumption OBJECT-TYPE
SYNTAX Unsigned32
UNITS milliwatts
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The amount of power consumed by remote device, as reported in the most recent CDP message. This
object is not instantiated if no Power Consumption field (TLV) was reported in the most recently
received CDP message.
::= { cdpCacheEntry 15 }
cdpCacheMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
Cisco Unified Communications Manager Managed Services Guide
7-136
Chapter 7 Cisco Management Information Base
OL-22523-01