Cisco MCS-7825-H3-IPC1 Service Manual page 939

Chapter 8 Industry-Standard Management Information Base
IF-MIB
Write access is not required.
OBJECT ifPromiscuousMode
MIN-ACCESS read-only
DESCRIPTION
Write access is not required.
OBJECT ifStackStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
Write access is not required, and only one of the six enumerated values for the RowStatus textual
convention need be supported, specifically: active(1).
OBJECT ifAdminStatus
SYNTAX INTEGER { up(1), down(2) }
MIN-ACCESS read-only
DESCRIPTION
Write access is not required, nor is support for the value testing(3).
::= { ifCompliances 1 }
ifCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
A compliance statement defined in a previous version of this MIB module, for SNMP entities which
have network interfaces.
MODULE -- this module
MANDATORY-GROUPS { ifGeneralInformationGroup, ifStackGroup2,
ifCounterDiscontinuityGroup }
GROUP ifFixedLengthGroup
DESCRIPTION
This group is mandatory for all network interfaces which are character-oriented or transmit data in
fixed-length transmission units.
GROUP ifHCFixedLengthGroup
DESCRIPTION
This group is mandatory only for those network interfaces which are character-oriented or transmit
data in fixed-length transmission units, and for which the value of the corresponding instance of
ifSpeed is greater than 20,000,000 bits/second.
GROUP ifPacketGroup
DESCRIPTION
This group is mandatory for all network interfaces which are packet-oriented.
GROUP ifHCPacketGroup
DESCRIPTION
Cisco Unified Communications Manager Managed Services Guide
8-135
OL-22523-01