Remote Out - Yamaha QX5 Owner's Manual

MIDI 2
These settings determine how the QX5 will react to and re-transmit (Echo) MIDI messages, and set the QX5''s
Device Number. To enter this mode, double-click the [CLOCK] switch.
There are 4 jobs in this mode.
1. REMOTE IN
2. REMOTE OUT
3. ECHO
(Press twice)
mocs 1>REMOTE IN
LOAD/SAVE ON
SHIFT Fi
|
l l
JOB
1> REMOTE IN E 2 > REMOTE OUT E 3 > ECHO pii DEVICE NUMBER
This determines whether the QX5 will receive Song Position, Song Select, Start,
Continue and Stop. (MIDI Clock reception depends on the Clock setting, p. 14.)
1>REMOTE IN
ON
You will usually want to ieave this ON. (Some reasons for turning it off might be
to let the QX5 keep on playing even after another sequencer had stopped, etc.,
but this will not occur in most uses.)
This determines whether the QX5 will transmit Song Position, Song Select, Start,
Continue and Stop.
2>REMOTE OUT
As with Remote In, you will usually want to leave this ON, so that other sequencers
or rhythm machines can be synchronized with the QX5.
This determines whether Channel messages and System Exclusive messages re-
ceived at MIDI IN are sent from MIDI OUT. System Exclusive messages for the
QX5 itself (System Exclusive Bulk Sequence Data with sub-status 0,1 or 2) are
not Echoed back. Also, System Common messages and System Realtime messages
are not Echoed back.
3>ECHO
REC MONITOR
Off, Direct, Rec Monitor