Safety; Safety Symbols; Qualified Personnel; Safety Precautions - Danfoss VLT AQUA Drive FC 202 Operating Manual

Operating Guide | VLT® AQUA Drive FC 202

2 Safety

2.1 Safety Symbols

The following symbols are used in this manual:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates a property damage message.

2.2 Qualified Personnel

To allow trouble-free and safe operation of the unit, only qualified personnel with proven skills are allowed to transport, store,
assemble, install, program, commission, maintain, and decommission this equipment.
Persons with proven skills:
• Are qualified electrical engineers, or persons who have received training from qualified electrical engineers and are suitably
experienced to operate devices, systems, plant, and machinery in accordance with pertinent laws and regulations.
• Are familiar with the basic regulations concerning health and safety/accident prevention.
• Have read and understood the safety guidelines given in all manuals provided with the unit, especially the instructions given in the
operating guide of the unit.
• Have good knowledge of the generic and specialist standards applicable to the specific application.

2.3 Safety Precautions

LACK OF SAFETY AWARENESS
This document gives important information on how to prevent injury and damage to the equipment or your system. Ignoring
them can lead to death, serious injury, or severe damage to the equipment.
Make sure to fully understand the dangers and safety measures incurred in your application.
-
10 | Danfoss A/S © 2018.10
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
W A R N I N G
AQ262141056213en-000101 / 130R0882
Safety