RIGOL
To Use the Built-in Help System
The help system of this oscilloscope provides instructions for all the function keys
(including menu keys) at the front panel. Press HELP to open the help interface and
press again to close the interface. The help interface mainly consists of two parts.
The left is "Help Options" and you can use "Button" or "Index" to select. The right is
"Help Display Area".
Help Options
Button:
Default mode. In this mode, you can press the buttons (except the power key, the
knob
, menu page up/down key
panel directly to get the corresponding help information of that button in the "Help
Display Area".
Use
to select "To Index" and then press the knob to switch to Index mode.
Index:
In this mode, use
Width"). The item being selected currently is displayed in green. Press the knob to
get the corresponding help information in the "Help Display Area".
Use
to select "To Button" and then press the knob to switch to Button mode.
1-36
Figure 1-15 Help Information
/
to select the item that needs to get help (for example: "Band
Help Display Area
and the Navigation knob
) at the front
DS6000 User's Guide