Coupler/Controller Configuration; Hex ); Table 226: Coupler/Controller Configuration; Table 227: Coupler/Controller Configuration - WAGO -I/O-SYSTEM 750 Manual

Hide thumbs Also See for WAGO-I/O-SYSTEM 750:
Table of Contents

Advertisement

290 Fieldbus Communication

12.3.5.12 Coupler/Controller Configuration (64

The fieldbus coupler configuration class allows reading and configuration of some
important fieldbus/controller process parameters. The following listings explain in
details all supported instances and attributes.
Instance 0 (Class Attributes)

Table 226: Coupler/Controller configuration (64

Attribute ID
1
2
Instance 1

Table 227: Coupler/Controller configuration (64

Attribute ID
5 (0x05)
6 (0x06)
7 (0x07)
8 (0x08)
9 (0x09)
10 (0x0A)
11 (0x0B)
12..26
(0x0C...0x1A)
40..43
(0x28...0x2B)
45 (0x2D)
46 (0x2E)
Manual
1.5.0
750-882 Media Redundancy ETHERNET Controller
Acces
Name
Data type Description
s
Get
Revision
UINT
Get
Max Instance
UINT
Acces
NV Name
s
Get
V
ProcessStat
e
Get
V
DNS_i_
Trmnldia
Get
V
CnfLen.
AnalogOut
Get
V
CnfLen.
AnalogInp
Get
V
CnfLen.
DigitalOut
Get
V
CnfLen.
DigitalInp
Set
NV Bk_Fault_
Reaction
Reserved for compatibility to DeviceNet
Reserved for compatibility to DeviceNet
Get
V
Bk_Led_Err
_Code
Get
V
Bk_Led_Err
_Arg
WAGO-I/O-SYSTEM 750
)
hex
) – Class
hex
Revision of this object
Max. number of instances
) – Instance 1
hex
Data type Description
USINT
State of coupler/controller, error
mask:
Bit 0: Local bus error
Bit 3: Module diagnostics (0x08)
Bit 7: Fieldbus error (0x80)
UINT
Module diagnostics:
Bit 0..7:
Module number
Bit 8..14: Module channel
Bit 15:
0/1 Error, repair/arisen
UINT
Number of I/O bits for the analog
output
UINT
Number of I/O bits for the analog
input
UINT
Number of I/O bits for the digital
output
UINT
Number of I/O bits for the digital
input
USINT
Fieldbus error reaction
0: stop local I/O cycles
1: set all output to 0
2: no error reaction
3: no error reaction
4: PFC task takes over control of
the outputs (apply to controllers)
UINT
I/O LED error code
UINT
I/O LED error argument
Default value
1 (0x0001)
1 (0x0001)
Default
value
0
0
-
-
-
-
1
0
0

Advertisement

Table of Contents
loading

This manual is also suitable for:

750-882

Table of Contents