Class Overview; Table 188: Cip Common Class; Table 189: Wago Specific Classes - WAGO -I/O-SYSTEM 750 Manual

268 Fieldbus Communication
12.3.5.2

Class Overview

CIP classes are included in the CIP specification of ODVA. They describe the
properties (Volume 1, "Common Industrial Protocol") of Ethernet and CAN
independent of their physical interface. The physical interface is described in a
separate specification. For EtherNet/IP, this is Volume 2 ("EtherNet/IP Adaptation
of CIP"), which describes the adaption of EtherNet /IP to CIP.
For this purpose, WAGO uses classes 01
which are described in Volume 1 ("Common Industrial Protocol").
Classes F5
CIP").
WAGO-specific classes listed in the overview table below are also available.
All CIP Common classes listed and the WAGO-specific classes listed below that
are described in detail in the following individual sections after a brief explanation
of the table headings in the object descriptions.

Table 188: CIP common class

Class
01
hex
02
hex
04
hex
05
hex
06
hex
F5
hex
F6
hex

Table 189: WAGO specific classes

Class
64
hex
65
hex
66
hex
67
hex
68
hex
69
hex
6A
hex
6B
hex
6C
hex
6D
hex
6E
hex
6F
hex
70
hex
71
hex
72
hex
Manual
1.5.0
750-882 Media Redundancy ETHERNET Controller
and F6 are supported from Volume 2 ("EtherNet/IP Adaptation of
hex hex
WAGO-I/O-SYSTEM 750
, 02 , 04 , 05
hex hex hex
Name
Identity
Message Router
Assembly
Connection
Connection Manager
TCP/IP Interface Object
Ethernet Link Object
Name
Coupler/Controller Configuration Object
Discrete Input Point
Discrete Output Point
Analog Input Point
Analog Output Point
Discrete Input Point Extended 1
Discrete Output Point Extended 1
Analog Input Point Extended 1
Analog Output Point Extended 1
Discrete Input Point Extended 2
Discrete Output Point Extended 2
Analog Input Point Extended 2
Analog Output Point Extended 2
Discrete Input Point Extended 3
Discrete Output Point Extended 3
, 06 and F4 ,
hex hex hex