WAGO -I/O-SYSTEM 750 Manual page 149

WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
Depending on whether a program is already present in the fieldbus controller, a
window will appear asking whether a (new) program should be loaded.
8. Respond with Yes to load the current program.
9. In menu Online, click on Create Boot project.
You compiled project will also be executed by this method, if you restart the
fieldbus controller or if there is a power failure.
10. Once the program has been loaded, start program processing in the menu
Online, menu item Start.
This command starts the processing of your program in the control system or in
the simulation.
"ONLINE" and "RUNNING" will then appear at the right of the status bar.
11. To terminate online operation, click the menu item Log off in the menu
Online.
Programming the PFC Using WAGO-I/O-PRO 149
Manual
1.5.0