13.2.5.19 As-Interface Master Module; Table 415: Knx/Eib/Tp1 Module 753-646 - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller

Table 415: KNX/EIB/TP1 Module 753-646

Input Process Image
Offset
0
1
2
3
4
5
6
7
8
9
10
11
Output Process Image
Offset
0
1
2
3
4
5
6
7
8
9
10
11

13.2.5.19 AS-interface Master Module

750-655
The length of the process image of the AS-interface master module can be set to
fixed sizes of 12, 20, 24, 32, 40 or 48 bytes.
It consists of a control or status byte, a mailbox with a size of 0, 6, 10, 12 or 18
bytes and the AS-interface process data, which can range from 0 to 32 bytes.
The AS-interface master module has a total of 6 to maximally 24 words data in
both the Input and Output Process Image. Word alignment is applied.
The first Input and output word, which is assigned to an AS-interface master
module, contains the status / control byte and one empty byte.
Subsequently the mailbox data are mapped, when the mailbox is permanently
superimposed (Mode 1).
Byte Destination
High Byte
-
S1
D1
D3
D5
D7
D9
D11
D13
D15
D17
D19
Byte Destination
High Byte
-
C1
D1
D3
D5
D7
D9
D11
D13
D15
D17
D19
Low Byte
S0 not used
extended
OP
Status byte
D0 Data byte 1
D2 Data byte 3
D4 Data byte 5
D6 Data byte 7
D8 Data byte 9
D10 Data byte 11
D12 Data byte 13
D14 Data byte 15
D16 Data byte 17
D18 Data byte 19
Low Byte
C0 not used
extended
OP
Control byte
D0 Data byte 1
D2 Data byte 3
D4 Data byte 5
D6 Data byte 7
D8 Data byte 9
D10 Data byte 11
D12 Data byte 13
D14 Data byte 15
D16 Data byte 17
D18 Data byte 19
I/O Modules 365
Description
Status byte
Opcode
Data byte 0
Data byte 2
Data byte 4
Data byte 6
Data byte 8
Data byte 10
Data byte 12
Data byte 14
Data byte 16
Data byte 18
Description
Control byte
Opcode
Data byte 0
Data byte 2
Data byte 4
Data byte 6
Data byte 8
Data byte 10
Data byte 12
Data byte 14
Data byte 16
Data byte 18
Manual
1.5.0