Channel Digital Input Modules; Channel Digital Input Module Ptc With Diagnostics And Output Process Data; Table 423: 4 Channel Digital Input Modules; Table 424: 8 Channel Digital Input Modules - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
13.3.1.5

4 Channel Digital Input Modules

750-402, -403, -408, -409, -414, -415, -422, -423, -428, -432, -433, -1420, -1421,
-1422
753-402, -403, -408, -409, -415, -422, -423, -428, -432, -433, -440

Table 423: 4 Channel Digital Input Modules

Input Process Image
Bit 7
The input modules seize 4 Instances in Class (0x65).
13.3.1.6 8 Channel Digital Input Modules
750-430, -431, -436, -437, -1415, -1416, -1417
753-430, -431, -434

Table 424: 8 Channel Digital Input Modules

Input Process Image
Bit 7
Data bit DI
8
Channel 8
The input modules seize 8 Instances in Class (0x65).
13.3.1.7 8 Channel Digital Input Module PTC with Diagnostics and Output
Process Data
750-1425
The digital input module PTC provides via one logical channel 2 byte for the input
and output process image.
The signal state of PTC inputs DI1 ... DI8 is transmitted to the fieldbus
coupler/controller via input data byte D0.
The fault conditions are transmitted via input data byte D1.
The channels 1 ... 8 are switched on or off via the output data byte D1. The
output data byte D0 is reserved and always has the value "0".
Bit 6 Bit 5
Bit 6 Bit 5
Data bit Data bit
DI 7 DI 6
Channel 7 Channel 6 Channel 5
Bit 4 Bit 3
Data bit
DI 4
Channel 4 Channel 3
Bit 4 Bit 3
Data bit Data bit Data bit
DI 5 DI 4
Channel 4 Channel 3
I/O Modules 371
Bit 2 Bit 1
Data bit Data bit Data bit
DI 3 DI 2
Channel 2 Channel 1
Bit 2 Bit 1
Data bit Data bit
DI 3 DI 2
Channel 2 Channel 1
Manual
Bit 0
DI 1
Bit 0
DI 1
1.5.0