Figure 48: Example Of Time Synchronization In "Wago Ethernet Settings - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller

Figure 48: Example of Time Synchronization in "WAGO Ethernet Settings"

6. Click on the [Apply] button.
Synchronize the real-time clock using the Web-based Management-System
1. Launch a Web browser (e.g., MS Internet Explorer or Mozilla) and enter the
IP address you have assigned your fieldbus node in the address bar.
2. Click [Enter] to confirm.
The start page of the Web interface loads.
3. Select "Clock" in the left menu bar.
4. If an inquiry screen appears, enter your user name and password (default:
user = "admin", password = "wago" or user = "user", password = "user").
The HTML page "Clock configuration" loads.
5. Set the values in the fields "Time on device", "Date" and "Timezone" to the
current values and enable the desired "Daylight Saving Time (DST)" option.
Commissioning 123
Manual
1.5.0