Discrete Output Point Extended 2 (6E ); Table 247: Discrete Output Point Extended; Table 248: Discrete Output Point Extended; Table 249: Discrete Output Point Extended - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
12.3.5.19 Discrete Output Point Extended 2 (6E
The extension of the "Discrete Output Point" class enables the exchange of data
from a fieldbus node that contains over 510 digital output points (DOPs). This
instance cope of the "Discrete Output Point Extended 1" class covers the DOPs
from 511 to 765 in the fieldbus node.
Instance 0 (Class Attributes)
Table 247: Discrete Output Point Extended 2 (6E
Attribute ID Access
1
2
Instance 511 ... 765 (Digital output value 511 up to 765)
Table 248: Discrete Output Point Extended 2 (6E
Attribute ID Access
1
Common Services
Table 249: Discrete Output Point Extended 2 (6E
Service
code
0E
hex
10
hex
12.3.5.20 Discrete Output Point Extended 3 (72
The extension of the "Discrete Output Point" class enables the exchange of data
from a fieldbus node that contains over 765 digital output points (DOPs). The
instance scope of the "Discrete Output Point Extended 2" class covers DOPs
from 766 to 1020 in the fieldbus node.
Instance 0 (Class Attributes)

Table 250: Discrete Output Point Extended 3 (72

Attribute ID Access
1
2
Name
Get Revision
Get Max Instance
Name
Get DopObj_Value
Service available Service-Name
Class Instance
Yes Yes Get_Attribute_Single Supplies contents of the appropriate
No Yes Set_Attribute_Single
Name
Get Revision
Get Max Instance
Fieldbus Communication 297
)
hex
) – Class
hex
Data type Description
UINT Revision of this object
UINT Max. number of instances
) – Instance 511...765
hex
Data type Description
BYTE Digital Output
(only Bit 0 valid)
) – Common service
hex
Description
attribute
Modifies an attribute value
)
hex
) – Class
hex
Data type Description
UINT Revision of this object
UINT Max. number of instances
Default
value
1 (0x0001)
-
Default
value
-
Default
value
1 (0x0001)
-
Manual
1.5.0