13.3.5.15 Vibration Velocity/Bearing Condition Monitoring Vib I/O; Table 465: Bluetooth ® Rf-Transceiver 750-644; Table 466: Vibration Velocity/Bearing Condition Monitoring Vib I/O 750-645 - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
Table 465: Bluetooth
Input and Output Process Image
Instance
n
The 750-644 constitutes a special module, whose process data (12, 24 or 48
bytes) occupy on instances in classes 0x67 and 0x68.

13.3.5.15 Vibration Velocity/Bearing Condition Monitoring VIB I/O

750-645
The Vibration Velocity/Bearing Condition Monitoring VIB I/O has a total of 12
bytes of user data in both the Input and Output Process Image (8 bytes of
module data and 4 bytes of control/status). The following table illustrates the
Input and Output Process Image, which have 8 words mapped into each image.
Word alignment is applied.

Table 466: Vibration Velocity/Bearing Condition Monitoring VIB I/O 750-645

Input and Output Process Image
Instance
n
n+1
n+2
n+3
The specialty modules represent 4x3 bytes input and output data and seize 4
Instances in Class (0x67) and 4 Instances in Class (0x68).
®
RF-Transceiver 750-644
Byte Destination
High Byte
-
D1
D3
D5
...
D45
Byte Destination
High Byte Low Byte
- C0/S0
D1 D0
- C1/S1
D3 D2
- C2/S2
D5 D4
- C3/S3
D7 D6
Low Byte
C0/S0 not used
D0
D2
Mailbox (0, 3, 6 or 9 words) and
D4
Process data (2-23 words)
...
D44
Description
not used
(log. Channel 1, Sensor input 1)
Data bytes
(log. Channel 1, Sensor input 1)
not used
(log. Channel 2, Sensor input 2)
Data bytes
(log. Channel 2, Sensor input 2)
not used
(log. Channel 3, Sensor input 1)
Data bytes
(log. Channel 3, Sensor input 3)
not used
(log. Channel 4, Sensor input 2)
Data bytes
(log. Channel 4, Sensor input 2)
I/O Modules 395
Description
Control/status
byte
Control/status byte
Control/status byte
Control/status byte
Control/status byte
Manual
1.5.0