WAGO 750-455 User Manual
  1. Manuals
  2. Brands
  3. WAGO Manuals
  4. I/O Systems
  5. 750-455
  6. User manual

WAGO 750-455 User Manual

4ai 4-20ma s.e. 4-channel analog input module 4-20 ma, single-ended
Hide thumbs Also See for 750-455:
Table of Contents

Advertisement

Quick Links

WAGO-I/O-SYSTEM 750
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
750-455(/xxx-xxx)
4AI 4-20mA S.E.
4-Channel Analog Input Module 4-20 mA, Single-
ended
Version 1.2.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Hinweise z ur Dokumentation/Impres sum für Standardhandbüc her - allg. Angaben, Ansc hriften, Tel efonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1

Advertisement

Table of Contents
loading

Related Manuals for WAGO 750-455

Summary of Contents for WAGO 750-455

  • Page 1 WAGO-I/O-SYSTEM 750 Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1 Manual 750-455(/xxx-xxx) 4AI 4-20mA S.E. 4-Channel Analog Input Module 4-20 mA, Single- ended Version 1.2.0...
  • Page 2 WAGO-I/O-SYSTEM 750 750-455 4AI 4-20mA S.E. © 2015 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-Mail: info@wago.com...
  • Page 3 2.1.1 Subject to Changes ................9 2.1.2 Personnel Qualifications ............... 9 2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying Provisions ..................... 9 2.1.4 Technical Condition of Specified Devices ......... 10 Safety Advice (Precautions) ..............11 Device Description ..................13 View ......................
  • Page 4 Table of Contents WAGO-I/O-SYSTEM 750 750-455 4AI 4-20mA S.E. 7.1.2 Marking for America According to NEC 500 ........39 Installation Regulations ................40 7.2.1 Special Conditions for Safe Use (ATEX Certificate TÜV 07 ATEX 554086 X) ................... 41 7.2.2 Special Conditions for Safe Use (ATEX Certificate TÜV 12 ATEX 106032 X) ...................

  • Page 5: Notes About This Documentation

    Pos : 10 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweis e z ur D okumentati on/Gültigkeits bereic h/Gültig keits ber eich Dokumentation Bus kl emme 750- xxxx, Standar dversi on und aufgelistete Varianten @ 14\mod_1358944038682_21.doc x @ 109354 @ @ 1...

  • Page 6: Symbols

    WAGO-I/O-SYSTEM 750 750-455 4AI 4-20mA S.E. Pos : 14.3 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Hinweis e z ur Dokumentation/Symbol e - Ü bersc hrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 14.4.1 /All e Serien ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hinweis e/Gefahr/Gefahr: _War nung vor Personenschäden allgemei n_ - Erl äuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
  • Page 7 WAGO-I/O-SYSTEM 750 Notes about this Documentation 750-455 4AI 4-20mA S.E. Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 14.5 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.2.0...

  • Page 8: Number Notation

    Notes about this Documentation WAGO-I/O-SYSTEM 750 750-455 4AI 4-20mA S.E. Pos : 14.6 /All e Seri en ( Allgemei ne Module)/Hi nweis e zur D okumentati on/Zahlens ysteme @ 3\mod_1221059454015_21.doc x @ 21711 @ 2 @ 1 Number Notation Table 2: Number Notation...

  • Page 9: Important Notes

    PLC programming. Pos : 17.5 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Bes timmungsgemäß e Verwendung Bes ti mmungsgemäße Verwendung 750-xxxx - Ü berschrift 3 und Inhal t @ 3\mod_1224064151234_21.doc x @ 24070 @ 3 @ 1 2.1.3...

  • Page 10: Technical Condition Of Specified Devices

    WAGO-I/O-SYSTEM 750 750-455 4AI 4-20mA S.E. Appropriate housing (per 94/9/EG) is required when operating the WAGO-I/O- SYSTEM 750 in hazardous environments. Please note that a prototype test certificate must be obtained that confirms the correct installation of the system in a housing or switch cabinet.

  • Page 11: Safety Advice (Precautions)

    Pos : 17.10.2 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en/Sic her hei ts- und s onstige Hi nweise/Gefahr/Gefahr: Ei nbau 0750- xxxx nur i n Gehäus en, Sc hränken oder el ektrisc hen Betriebsräumen! @ 6\mod_1260180556692_21.doc...
  • Page 12 Important Notes WAGO-I/O-SYSTEM 750 750-455 4AI 4-20mA S.E. Do not use any contact spray! Do not use any contact spray. The spray may impair contact area functionality in connection with contamination. Pos : 17.11.5 /Alle Serien (Allgemeine D okumente) (Allgemeine M odul e)/Wichtige Erläuter ungen/Sic herheits hinweise/Ac htung/Ac htung: Verpol ung ver mei den! @ 6\mod_1260184045744_21.doc x @ 46767 @ @ 1...

  • Page 13: Device Description

    Pos : 20.3 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ei nlei tung/F unktion/Gal vanis che Tr ennung Eing angssignal/Gal vanis che Tr ennung Eing angssignal/Systemebene ( 12 Bit) @ 6\mod_1255353269263_21.doc x @ 42550 @ @ 1 The input signal is electrically isolated and is transmitted with a resolution of 12 bits.

  • Page 14: View

    Pos : 23 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansic ht/Anal ogei ngangskl emmen/Ansicht 750-0455 @ 15\mod_1370334937962_21.doc x @ 121639 @ @ 1 Figure 1: View Pos : 24 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansic ht/Ansic ht C ageCl amp® _Leg ende mit LED s @ 15\mod_1370867188922_21.doc x @ 122225 @ @ 1 Table 4: Legend for Figure “View”...

  • Page 15: Connectors

    Pos : 28.3 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Achtung/Achtung: ESD - Auf g ute Erdung der U mgebung ac hten! @ 7\mod_1266318538667_21.doc x @ 50708 @ @ 1 Ensure that the environment is well grounded! The devices are equipped with electronic components that may be destroyed by electrostatic discharge.

  • Page 16: Power Jumper Contacts/Field Supply

    Pos : 31.3 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üsse/Leistungs kontakte 2 LK (Mess er/Leis tungs kontakte 2 LK (Messer /Feder) - Abbil dung, einfac he Breite - Standard @ 15\mod_1367500700037_21.doc x @ 118396 @ @ 1 Figure 3: Power Jumper Contacts Pos : 31.4 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üsse/Leistungs kontakte 2 LK (Mess er/Leis tungs kontakte 2 LK (Messer /Feder) - Legende @ 15\mod_1371721352500_21.doc x @ 123710 @ @ 1...
  • Page 17 WAGO-I/O-SYSTEM 750 Device Description 750-455 4AI 4-20mA S.E. Use supply modules for ground (earth)! The I/O module has no power jumper contacts for receiving and transmitting the earth potential. Use a supply module when an earth potential is needed for the subsequent I/O modules.
  • Page 18 CAGE CLAMP Connectors Pos : 34 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üss e/Analogei ngangs klemmen/Ansc hlüsse 750-0453, -0455, - 0457 und - 0459 @ 15\mod_1370335893038_21.doc x @ 121647 @ @ 1 ® Figure 4: CAGE CLAMP Connectors ®...

  • Page 19: Display Elements

    Pos : 37 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Anz eigeel emente - Übersc hrift 2 @ 4\mod_1240984390875_21.doc x @ 31964 @ 2 @ 1 Display Elements Pos : 38 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Anz eigeelemente/Anal ogei ngangs klemmen/Anz eigeel emente 750- 0455 @ 21\mod_1423226327425_21.doc x @ 173708 @ @ 1 Figure 5: Display Elements Table 7: Legend for Figure “Display Elements”...

  • Page 20: Operating Elements

    Operating Elements Pos : 41 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Bedienel emente/Bedi enel emente Bus kl emme 750- xxxx nic ht vor handen @ 4\mod_1236322031125_21.doc x @ 28063 @ @ 1 The I/O module 750-455 has no operating elements.

  • Page 21: Schematic Diagram

    Pos : 43 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Sc hematisches Sc haltbil d - Ü bersc hrift 2 @ 4\mod_1240984441312_21.doc x @ 31967 @ 2 @ 1 Schematic Diagram Pos : 44 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Schematisc he Sc haltbil der/Anal ogeing angs kl emmen/Sc hematisc hes Sc haltbild 750-0455 @ 15\mod_1370337428985_21.doc x @ 121651 @ @ 1 Figure 6: Schematic Diagram Pos : 45 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 22: Technical Data

    Pos : 46 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Technisc he Daten - Ü berschrift 2 @ 3\mod_1232967587687_21.doc x @ 26924 @ 2 @ 1 Technical Data Pos : 47 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/T echnisc he Daten/Anal ogeing angs kl emmen/T ec hnis che D aten 750-0455 @ 15\mod_1370337678959_21.doc x @ 121655 @ 3333 @ 1 3.6.1 Device Table 8: Technical Data –...

  • Page 23: Connection Type

    Pos : 49 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/T echnisc he Daten/Kli matische U mg ebungs bedi ngungen/Technisc he Daten Klimat. U mgebungs bed. mi t erw. T emp. -20...+60°C /-40...+85°C für /025 @ 5\mod_1247658089120_21.doc...

  • Page 24: Approvals

    Pos : 52 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Z ulass ungen/Allgemei n/Z ulass ungen Bus kl emme 750- xxxx Allgemein, Standardversi on und all e Vari anten - Einl eitung @ 3\mod_1233911570312_21.doc x @ 27390 @ @ 1...
  • Page 25 750-455 4AI 4-20mA S.E. Pos : 59 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Z ulass ungen/Schiff/Z ulas sungen Bus klemme 750- xxxx Sc hiff, nur Standardversi on - Ei nleitung @ 9\mod_1281526425939_21.doc x @ 63108 @ @ 1 The following ship approvals have been granted to the basic version of 750-455 I/O modules: Pos : 60.1 /All e Seri en ( Allgemei ne Dokumente) ( Allgemei ne Module)/Z ulassungen/Sc hiffsz ul ass ungen/ABS ( Americ an Bureau of Shi ppi ng) @ 3\mod_1224055151062_0.doc x @ 24023 @ @ 1...

  • Page 26: Standards And Guidelines

    Standards and Guidelines Pos : 67 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/N ormen und Ric htlini en/EM V-Nor men Bus kl emme 750- xxxx, ohne Variantenang abe - Einl eitung @ 4\mod_1242803944015_21.doc x @ 33642 @ @ 1...

  • Page 27: Process Image

    Process Image Pos : 74 /Serie 750 ( WAGO-I/O-SYST EM)/Proz ess abbild Kl emmenbus /Analogei ngangs klemmen/Pr ozessabbild 750- 0455 @ 5\mod_1251723807187_21.doc x @ 41164 @ @ 1 The I/O module provides 1 status byte (8 bits) and 1 data word (16 bits) per channel.

  • Page 28: Mounting

    I/O modules with fewer power contacts. Pos : 77.2 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Vorsic ht/Vorsicht: Verl etz ungsgefahr durc h s charfkantige M ess er kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1 Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged.

  • Page 29: Inserting And Removing Devices

    Mounting 750-455 4AI 4-20mA S.E. Pos : 77.6 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/Geräte einfüg en und entfer nen - Ü berschrift 2 @ 3\mod_1231768483250_21.doc x @ 25950 @ 2 @ 1 Inserting and Removing Devices Pos : 77.7 /All e Seri en ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hi nweis e/Ac htung/Achtung: Arbeiten an Ger äten nur s pannungsfr ei durc hführ en! @ 6\mod_1256193963573_21.doc x @ 43426 @ @ 1 Perform work on devices only if they are de-energized! Working on energized devices can damage them.

  • Page 30: Removing The I/O Module

    Mounting WAGO-I/O-SYSTEM 750 750-455 4AI 4-20mA S.E. Pos : 77.10 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/D emonti eren/Bus kl emme entfer nen @ 4\mod_1239169375203_21.doc x @ 30334 @ 3 @ 1 5.2.2 Removing the I/O Module Remove the I/O module from the assembly by pulling the release tab.

  • Page 31: Connect Devices

    Connect Devices Pos : 80 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1 ®...

  • Page 32: Connection Example

    Pos : 82 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Ansc hließ en/Ans chl uss beis piel - Übersc hrift 2 @ 4\mod_1242621672468_21.doc x @ 33293 @ 2 @ 1 Connection Example Pos : 83 /Serie 750 ( WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Hi nweis /Hinweis: Geschir mte Signalleitung en ver wenden! @ 7\mod_1265723251019_21.doc x @ 50140 @ @ 1 Use shielded signal lines! Only use shielded signal lines for analog signals and I/O modules which are equipped with shield clamps.

  • Page 33: Use In Hazardous Environments

    Use in Hazardous Environments Pos : 86.2 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Ei ns atz ber eich Serie 750 @ 3\mod_1234272230203_21.doc x @ 27500 @ @ 1 The WAGO-I/O-SYSTEM 750 (electrical equipment) is designed for use in Zone 2 hazardous areas.

  • Page 34: Marking Configuration Examples

    Marking for Europe According to ATEX and IEC-Ex Pos : 86.6 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der ATEX- und IEC- Ex-zug elass enen Bus klemmen gemäß C ENELEC und IEC_2013 @ 14\mod_1360569228625_21.doc x @ 111294 @ @ 1 Figure 12: Side Marking Example for Approved I/O Modules According to ATEX and IECEx Figure 13: Text Detail –...
  • Page 35 WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 750-455 4AI 4-20mA S.E. Table 17: Description of Marking Example for Approved I/O Modules According to ATEX and IECEx Printing on Text Description TÜV 07 ATEX 554086 X Approving authority and certificate numbers IECEx TUN 09.0001 X...
  • Page 36 750-455 4AI 4-20mA S.E. Pos : 86.8 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der Ex-i- und IEC-Ex-i-zug elas senen Bus klemmen gemäß C ENELEC und IEC _2013 @ 14\mod_1360569320118_21.doc x @ 111298 @ @ 1 Figure 14: Side Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx.
  • Page 37 WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 750-455 4AI 4-20mA S.E. Table 18: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx Inscription Text Description TÜV 07 ATEX 554086 X Approving authority and certificate numbers IECEx TUN 09.0001X...
  • Page 38 Use in Hazardous Environments WAGO-I/O-SYSTEM 750 750-455 4AI 4-20mA S.E. Table 18: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx Gases Equipment group: All except mining 3(1)G Category 3 (Zone 2) equipment containing a safety...

  • Page 39: Marking For America According To Nec 500

    750-455 4AI 4-20mA S.E. Pos : 86.10 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Kennz eichnung für Ameri ka gemäß N EC 500 - Übersc hrift 3 @ 3\mod_1224158423187_21.doc x @ 24188 @ 3 @ 1 7.1.2 Marking for America According to NEC 500 Pos : 86.11 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung gemäß...

  • Page 40: Installation Regulations

    Use in Hazardous Environments WAGO-I/O-SYSTEM 750 750-455 4AI 4-20mA S.E. Pos : 86.13 /Alle Serien (Allgemeine M odul e)/Ei ns atz i n Ex-Bereic hen/Errichtungsbes timmungen - Ü bersc hrift 2 @ 3\mod_1232453624234_21.doc x @ 26370 @ 2 @ 1 Installation Regulations Pos : 86.14 /Alle Serien (Allgemeine M odul e)/Ei ns atz i n Ex-Bereic hen/Errichtungsbes timmungen Ei nleitung_2013 @ 14\mod_1360582328318_21.doc x @ 111371 @ @ 1...

  • Page 41: Special Conditions For Safe Use (Atex Certificate Tüv 07 Atex 554086 X)

    Pos : 86.16 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 07 ATEX 554086_X_2013_2 @ 15\mod_1368620071975_21.doc...

  • Page 42: Special Conditions For Safe Use (Atex Certificate Tüv 12 Atex 106032 X)

    Pos : 86.18 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 12 ATEX 106032x_2013_2 @ 15\mod_1368620479454_21.doc...
  • Page 43 Pos : 86.20 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 09.0001 X_2013_2 @ 15\mod_1368620660911_21.doc...

  • Page 44: Special Conditions For Safe Use (Iec-Ex Certificate Iecex Tun 12.0039 X)

    Pos : 86.22 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 12.0039 X_2013_2 @ 15\mod_1368620821493_21.doc...

  • Page 45: Special Conditions For Safe Use According To Ansi/Isa 12.12.01

    Use in Hazardous Environments 750-455 4AI 4-20mA S.E. Pos : 86.24 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Errichtungsbesti mmung en AN SI ISA 12.12.01_2013_2 @ 15\mod_1368620942842_21.doc x @ 119794 @ 3 @ 1 7.2.5 Special Conditions for Safe Use According to ANSI/ISA 12.12.01...

  • Page 46: List Of Figures

    Pos : 89 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1 List of Figures Figure 1: View ....................... 14 Figure 2: Data Contacts ..................15 Figure 3: Power Jumper Contacts .................

  • Page 47: List Of Tables

    WAGO-I/O-SYSTEM 750 750-455 4AI 4-20mA S.E. Pos : 91 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Variants ..................... 5 Table 2: Number Notation ..................
  • Page 48 Pos : 94 /D okumentation allgemei n/Einband/Einband H andbuc h - R üc kseite 2015 @ 9\mod_1285229376516_21.doc x @ 64944 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Hansastraße 27 • D-32423 Minden Phone: 05 71/8 87 –...

This manual is also suitable for:

Wago-i/o-system 750750-455/025-000I/o-system 750-517

Table of Contents