Power Contacts/Field Supply; Figure 36: Example For The Arrangement Of Power Contacts - WAGO -I/O-SYSTEM 750 Manual

76 Connect Devices
6.2

Power Contacts/Field Supply

Risk of injury due to sharp-edged blade contacts!
The blade contacts are sharp-edged. Handle the I/O module carefully to prevent
injury.
Self-cleaning power jumper contacts used to supply the field side are located on
the right side of most of the fieldbus couplers/controllers and on some of the I/O
modules. These contacts come as touch-proof spring contacts. As fitting
counterparts the I/O modules have male contacts on the left side.

Figure 36: Example for the Arrangement of Power Contacts

Field bus node configuration and test via smartDESIGNER
With the WAGO ProServe
structure of a fieldbus node. You can test the configuration via the integrated
accuracy check.
Manual
1.5.0
750-882 Media Redundancy ETHERNET Controller
®
Software smartDESIGNER, you can configure the
WAGO-I/O-SYSTEM 750