WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
13.3.5.6
SSI Transmitter Interface Modules
750-630, (and all variations)
The process image of the / 003-000-variants depends on the parameterized
operating mode!
The operating mode of the configurable /003-000 I/O module versions can be
set. Based on the operating mode, the process image of these I/O modules is
then the same as that of the respective version.
The above SSI Transmitter Interface modules have a total of 4 bytes of user data
in the Input Process Image, which has 2 words mapped into the image.
Word alignment is applied.
Table 453: SSI Transmitter Interface Modules
Input Process Image
Instance
n
n+1
The specialty modules represent 2x2 bytes input data and seize 2 Instances in
Class (0x67).
750-630/000-004, -005, -007
In the input process image, SSI transmitter interface modules with status occupy
5 usable bytes, 4 data bytes, and 1 additional status byte. A total of 3 words are
assigned in the process image via word alignment.
Table 454: SSI Transmitter Interface I/O Modules with an Alternative Data Format
Input Process Image
Instance
n
The specialty modules represent 1x6 bytes and seize 1 Instance in Class (0x67).
Byte Destination
High Byte
D1
D3
Byte Destination
High Byte
-
D1
D3
Low Byte
D0
D2
High Byte
S
not used
D0
D2
I/O Modules 387
Description
Data bytes
Description
Status byte
Data bytes
Manual
1.5.0