WAGO 750-517 Manual

2do 230v ac 1.0a/ relay 2co/ potential free 2-channel relay output module 230 vac, 1.0 a, isolated outputs, 2 changeover contacts
Hide thumbs Also See for 750-517:
Table of Contents
  • Deutsch

    • Table of Contents
    • 1 Notes about this Documentation

      • Validity of this Documentation
      • Copyright
      • Symbols
      • Number Notation
      • Font Conventions
      • Table 1: Number Notation
      • Table 2: Font Conventions
    • 2 Important Notes

      • Legal Bases
      • Subject to Changes
      • Personnel Qualifications
      • Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying Provisions
      • Technical Condition of Specified Devices
      • Safety Advice (Precautions)
    • 3 Device Description

      • View
      • Table 3: Legend for Figure "View
      • Connectors
      • Data Contacts/Internal Bus
      • Power Jumper Contacts/Field Supply
      • CAGE CLAMP ® Connectors
      • Table 4: Legend for Figure "CAGE CLAMP ® Connectors
      • Display Elements
      • Operating Elements
      • Table 5: Legend for Figure "Display Elements
      • Schematic Diagram
      • Technical Data
      • Device
      • Power Supply
      • Communication
      • Outputs
      • Table 6: Technical Data - Device
      • Table 7: Technical Data - Power Supply
      • Table 8: Technical Data - Communication
      • Table 9: Technical Data - Outputs
      • Climatic Environmental Conditions
      • Connection Type
      • Table 10: Technical Data - Climatic Environmental Conditions
      • Table 11: Technical Data - Field Wiring
      • Table 12: Technical Data - Data Contacts
      • Load Limiting Curve
      • Approvals
      • Standards and Guidelines
    • 4 Process Image

      • Table 13: Output Bits
    • 5 Mounting

      • Mounting Sequence
      • Inserting and Removing Devices
      • Inserting the I/O Module
      • Removing the I/O Module
    • 6 Connect Devices

      • Connecting a Conductor to the CAGE CLAMP
      • Connection Examples
      • 1-Wire Connection, Protection Class I Actuators
      • 1-Wire Protection Class II and III Actuators
      • Operating the Relay in Separate Current Circuits
      • Operating the Relay in Series Connection
      • Protective Circuits for Contacts of Relay Modules
      • Table 14: Protective Circuits for Contacts of Relay Modules
    • 7 Use in Hazardous Environments

      • Marking Configuration Examples
      • Marking for Europe According to ATEX and IEC-Ex
      • Table 15: Description of Marking Example for Approved I/O Modules According to ATEX and Iecex
      • Table 17: Description of Marking Example for Approved I/O Modules
      • Table 16: Description of Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
      • Marking for America According to NEC 500
      • Installation Regulations
      • Special Conditions for Safe Use (ATEX Certificate TÜV 07 ATEX 554086 X)
      • Special Conditions for Safe Use (ATEX Certificate TÜV 12 ATEX 106032 X)
      • Special Conditions for Safe Use (IEC-Ex Certificate TUN 09.0001 X)
      • Special Conditions for Safe Use (IEC-Ex Certificate Iecex TUN 12.0039 X)
      • Special Conditions for Safe Use According to ANSI/ISA
    • Figure 1: View
    • Figure 2: Data Contacts
    • Figure 3: CAGE CLAMP ® Connectors
    • Figure 4: Display Elements
    • Figure 5: Schematic Diagram
    • Figure 6: Load Limiting Curve of the Relay
    • Figure 7: Insert I/O Module (Example)
    • Figure 8: Snap the I/O Module into Place (Example)
    • Figure 9: Removing the I/O Module (Example)
    • Figure 10: Connecting a Conductor to a CAGE CLAMP
    • Figure 11: Connection Example, 1-Wire Connection for Protection Class I Actuators (Ground Conductor)
    • Figure 12: Connection Example 1-Wire Connection for Protection Class II (Double Insulated) and Class III (Safety Extra-Low Voltage) Actuators
    • Figure 13: Connection Example - Separate Current Circuits
    • Figure 14: Connection Example - Series Connection
    • Figure 15: Diode
    • Figure 16: Zener Diode and Diode
    • Figure 17: Suppressor Diode
    • Figure 18: Varistor
    • Figure 19: R/C Combination
    • Figure 20: Side Marking Example for Approved I/O Modules According to ATEX and Iecex
    • Figure 21: Text Detail - Marking Example for Approved I/O Modules According to ATEX and Iecex
    • Figure 22: Side Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
    • Figure 23: Text Detail - Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
    • Figure 24: Side Marking Example for I/O Modules According to NEC 500
    • Figure 25: Text Detail - Marking Example for Approved I/O Modules

Advertisement

Quick Links

WAGO-I/O-SYSTEM 750
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
750-517
2DO 230V AC 1.0A/ Relay 2CO/ Potential Free
2-Channel Relay Output Module 230 VAC, 1.0 A,
Isolated Outputs, 2 Changeover Contacts
Version 1.1.2
Pos : 3 /Alle Serien (Allgemeine M odul e)/Hinweise z ur Dokumentation/Impres sum für Standardhandbüc her - allg. Angaben, Ansc hriften, Tel efonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for WAGO 750-517

  • Page 1 WAGO-I/O-SYSTEM 750 Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1 Manual 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free 2-Channel Relay Output Module 230 VAC, 1.0 A,...
  • Page 2 WAGO-I/O-SYSTEM 750 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free © 2015 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 –...
  • Page 3: Table Of Contents

    WAGO-I/O-SYSTEM 750 Table of Contents 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 5 /D okumentati on allgemein/Verzeic hnisse/Inhalts verz eichnis - Ü berschrift oG und Verzei chnis @ 3\mod_1219151230875_21.doc x @ 21063 @ @ 1 Table of Contents Notes about this Documentation ..............
  • Page 4 Table of Contents WAGO-I/O-SYSTEM 750 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free 6.2.3 Operating the Relay in Separate Current Circuits ......33 6.2.4 Operating the Relay in Series Connection.......... 34 Protective Circuits for Contacts of Relay Modules ......... 35 Use in Hazardous Environments ..............
  • Page 5: Notes About This Documentation

    Validity of this Documentation Pos : 10 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweis e z ur D okumentati on/Gültigkeits bereic h/Gültig keits ber eich Dokumentation Bus kl emme 750- xxxx, ohne Variantenangabe @ 14\mod_1358944037947_21.doc x @ 109346 @ @ 1 This documentation is only applicable to the I/O module 750-517 (2DO 230V AC 1.0A/ Relay 2CO/ Potential Free).
  • Page 6: Symbols

    WAGO-I/O-SYSTEM 750 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 12.3 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Hinweis e z ur Dokumentation/Symbol e - Ü bersc hrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 12.4.1 /All e Serien ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hinweis e/Gefahr/Gefahr: _War nung vor Personenschäden allgemei n_ - Erl äuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
  • Page 7: Number Notation

    WAGO-I/O-SYSTEM 750 Notes about this Documentation 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 12.5 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Pos : 12.6 /All e Seri en ( Allgemei ne Module)/Hi nweis e zur D okumentati on/Dars tellung der Zahlens ys teme - Ü...
  • Page 8: Important Notes

    PLC programming. Pos : 15.5 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Bes timmungsgemäß e Verwendung Bes ti mmungsgemäße Verwendung 750-xxxx - Ü berschrift 3 und Inhal t @ 3\mod_1224064151234_21.doc x @ 24070 @ 3 @ 1 2.1.3...
  • Page 9: Technical Condition Of Specified Devices

    WAGO-I/O-SYSTEM 750 Important Notes 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Appropriate housing (per 94/9/EG) is required when operating the WAGO-I/O- SYSTEM 750 in hazardous environments. Please note that a prototype test certificate must be obtained that confirms the correct installation of the system in a housing or switch cabinet.
  • Page 10: Safety Advice (Precautions)

    Pos : 15.10.2 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en/Sic her hei ts- und s onstige Hi nweise/Gefahr/Gefahr: Ei nbau 0750- xxxx nur i n Gehäus en, Sc hränken oder el ektrisc hen Betriebsräumen! @ 6\mod_1260180556692_21.doc...
  • Page 11 WAGO-I/O-SYSTEM 750 Important Notes 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Protect the components against materials having seeping and insulating properties! The components are not resistant to materials having seeping and insulating properties such as: aerosols, silicones and triglycerides (found in some hand creams).
  • Page 12: Device Description

    300 VDC. Pos : 18.8 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Achtung/Achtung: Kei ne Ver wendung von untersc hiedlichen Phasen eines Drehstr omnetz es an bei den Kanälen @ 22\mod_1425393912913_21.doc x @ 176585 @ @ 1 No use of different phases of a three-phase system on both channels! The max.
  • Page 13 Pos : 18.14 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Hinweis/Hi nweis : Potenti aleinspeis eklemme für Erde eins etz en! (keine LK für Er de) @ 3\mod_1226499037468_21.doc...
  • Page 14: View

    Figure 1: View Pos : 22 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansic ht/Ansic ht C ageCl amp® _Leg ende mit LED s_ohne Leis tungs kontakte @ 16\mod_1371816091053_21.doc x @ 124052 @ @ 1 Table 3: Legend for Figure “View”...
  • Page 15: Connectors

    Pos : 26.3 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Achtung/Achtung: ESD - Auf g ute Erdung der U mgebung ac hten! @ 7\mod_1266318538667_21.doc x @ 50708 @ @ 1 Ensure that the environment is well grounded! The devices are equipped with electronic components that may be destroyed by electrostatic discharge.
  • Page 16: Power Jumper Contacts/Field Supply

    The I/O module 750-517 has no power jumper contacts. Pos : 30.1 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Hinweis/Hi nweis: Potenti alei ns peis ekl emme ei nsetzen! ( kei ne LK) @ 3\mod_1226499089640_21.doc x @ 25026 @ @ 1 Use a supply module! Use a supply module for field-side power supply of downstream I/O modules.
  • Page 17: Cage Clamp ® Connectors

    750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 32 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üss e/CAGE CLAMP- Anschl üss e - Ü berschrift 3 @ 6\mod_1256296337770_21.doc x @ 43674 @ 3 @ 1 ®...
  • Page 18: Display Elements

    Pos : 35 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Anz eigeel emente - Übersc hrift 2 @ 4\mod_1240984390875_21.doc x @ 31964 @ 2 @ 1 Display Elements Pos : 36 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Anz eigeelemente/Digitalausgangs kl emmen/Anz eigeelemente 750-05xx 2 D O C O (Ag n, Cgn) @ 16\mod_1371808897994_21.doc x @ 123970 @ @ 1 Figure 4: Display Elements Table 5: Legend for Figure “Display Elements”...
  • Page 19: Schematic Diagram

    Pos : 40 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibung/Sc hematisches Sc haltbil d - Ü bersc hrift 2 @ 4\mod_1240984441312_21.doc x @ 31967 @ 2 @ 1 Schematic Diagram Pos : 41 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Schematisc he Sc haltbil der/Digitalausgangs klemmen/Schematisc hes Sc haltbil d 750-0517 @ 16\mod_1371808955929_21.doc x @ 123973 @ @ 1 Figure 5: Schematic Diagram Pos : 42 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
  • Page 20: Technical Data

    Pos : 45 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/T echnisc he Daten/Kli matische U mg ebungs bedi ngungen/Technisc he Daten Klimat. U mgebungs bed. ohne er w. Temp. 0...55°C/-25...+85°C @ 5\mod_1247657968368_21.doc x @ 37603 @ 3 @ 1...
  • Page 21: Climatic Environmental Conditions

    Connection Type Pos : 46.2 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/T echnisc he Daten/T ec hnische D aten Verdr ahtungs ebene CC - 0,08 bis 2,5mm2 @ 17\mod_1380121238809_21.doc x @ 132780 @ @ 1 Table 11: Technical Data – Field Wiring ®...
  • Page 22: Load Limiting Curve

    Device Description WAGO-I/O-SYSTEM 750 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Load Limiting Curve Figure 6: Load Limiting Curve of the Relay Continuous current specified to 1 A/channel For reasons of power loss, the continuous current is specified for the I/O module to 1 A per channel.
  • Page 23: Approvals

    750 > System Description. Pos : 51 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Z ulass ungen/Allgemei n/Z ulass ungen Bus kl emme 750- xxxx Allgemein, ohne Variantenang abe - Einl eitung @ 4\mod_1237460656921_21.doc x @ 28643 @ @ 1 The following approvals have been granted to 750-517 I/O modules: Pos : 52.1 /All e Seri en ( Allgemei ne Dokumente) ( Allgemei ne Module)/Z ulassungen/Standardz ulassungen/C E (Konformi täts kennz eichnung) @ 3\mod_1224494777421_21.doc x @ 24276 @ @ 1...
  • Page 24 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 58 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Z ulass ungen/Schiff/Z ulas sungen Bus klemme 750- xxxx Sc hiff, ohne Variantenangabe - Ei nlei tung @ 4\mod_1237190918453_21.doc x @ 28420 @ @ 1 The following ship approvals have been granted to 750-517 I/O modules: Pos : 59.1 /All e Seri en ( Allgemei ne Dokumente) ( Allgemei ne Module)/Z ulassungen/Sc hiffsz ul ass ungen/ABS ( Americ an Bureau of Shi ppi ng) @ 3\mod_1224055151062_0.doc x @ 24023 @ @ 1...
  • Page 25: Standards And Guidelines

    Standards and Guidelines Pos : 62 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/N ormen und Ric htlini en/EM V-Nor men Bus kl emme 750- xxxx, ohne Variantenang abe - Einl eitung @ 4\mod_1242803944015_21.doc x @ 33642 @ @ 1...
  • Page 26: Process Image

    Process Image Pos : 69 /Serie 750 ( WAGO-I/O-SYST EM)/Proz ess abbild Kl emmenbus /Hinweis: Prozes sabbildmapping abhängig von FBK/PFC, ohne Status-/C ontr olbyte @ 6\mod_1256126797251_21.doc x @ 43340 @ @ 1 Mapping of process data in the process image of fieldbus systems The representation of the process data of some I/O modules or their variants in the process image depends on the fieldbus coupler/controller used.
  • Page 27: Mounting

    I/O modules with fewer power contacts. Pos : 73.2 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Vorsic ht/Vorsicht: Verl etz ungsgefahr durc h s charfkantige M ess er kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1 Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged.
  • Page 28: Inserting And Removing Devices

    750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 73.6 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/Geräte einfüg en und entfer nen - Ü berschrift 2 @ 3\mod_1231768483250_21.doc x @ 25950 @ 2 @ 1 Inserting and Removing Devices Pos : 73.7 /All e Seri en ( Allgemei ne Module)/Wic htige Erläuterungen/Sicherheits- und sons tige Hi nweis e/Ac htung/Achtung: Arbeiten an Ger äten nur s pannungsfr ei durc hführ en! @ 6\mod_1256193963573_21.doc x @ 43426 @ @ 1...
  • Page 29: Removing The I/O Module

    WAGO-I/O-SYSTEM 750 Mounting 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 73.10 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/D emonti eren/Bus kl emme entfer nen @ 4\mod_1239169375203_21.doc x @ 30334 @ 3 @ 1 5.2.2 Removing the I/O Module Remove the I/O module from the assembly by pulling the release tab.
  • Page 30: Connect Devices

    Check if the voltage is positively isolated. Pos : 77 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1 ®...
  • Page 31: Figure 10: Connecting A Conductor To A Cage Clamp

    Pos : 79 /Serie 750 ( WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Achtung/Achtung: Kei ne Ver wendung von untersc hiedlichen Phasen ei nes Drehstr omnetz es an bei den Kanälen @ 22\mod_1425393912913_21.doc x @ 176585 @ @ 1...
  • Page 32: Connection Examples

    Pos : 81 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Ansc hließ en/Ans chl uss beis piel e - Ü berschrift 2 @ 4\mod_1240996036328_21.doc x @ 32010 @ 2 @ 1 Connection Examples Pos : 82 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Anschl uss beispi ele/Digitalausgangs klemmen/Ansc hl ussbeis piel e 750-0517_2DO_1L_0LK @ 22\mod_1425472310531_21.doc x @ 176734 @ 33 @ 1 6.2.1...
  • Page 33: Operating The Relay In Separate Current Circuits

    750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 84 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Anschl uss beispi ele/Digitalausgangs klemmen/Ansc hl ussbeis piel e 750-0517_getrennte_Stromkr eise + Rei hensc haltung @ 23\mod_1440683248412_21.doc x @ 190457 @ 33 @ 1 6.2.3...
  • Page 34: Operating The Relay In Series Connection

    Connect Devices WAGO-I/O-SYSTEM 750 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free 6.2.4 Operating the Relay in Series Connection Figure 14: Connection Example – Series Connection In this connection example, the channels of the I/O module are in series connection.
  • Page 35: Protective Circuits For Contacts Of Relay Modules

    750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 86 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Anschl uss beispi ele/Digitalausgangs klemmen/Kontaktsc hutz beschaltung für Rel ais klemmen @ 12\mod_1339677705690_21.doc x @ 97510 @ 2 @ 1 Protective Circuits for Contacts of Relay Modules Switching off inductive loads such as contactors and solenoid valves can generate transients with voltage peaks of up to several thousand volts.
  • Page 36: Figure 19: R/C Combination

    Connect Devices WAGO-I/O-SYSTEM 750 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Table 14: Protective Circuits for Contacts of Relay Modules Protective Circuits Additional Defined Bipolar Advantages and Off-Delay Induction Effective Disadvantages Voltage Attenuation Limitation Advantages: • HF attenuation via power storage •...
  • Page 37: Use In Hazardous Environments

    Use in Hazardous Environments Pos : 88.2 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Ei ns atz ber eich Serie 750 @ 3\mod_1234272230203_21.doc x @ 27500 @ @ 1 The WAGO-I/O-SYSTEM 750 (electrical equipment) is designed for use in Zone 2 hazardous areas.
  • Page 38: Marking Configuration Examples

    Marking for Europe According to ATEX and IEC-Ex Pos : 88.6 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der ATEX- und IEC- Ex-zug elass enen Bus klemmen gemäß C ENELEC und IEC_2013 @ 14\mod_1360569228625_21.doc x @ 111294 @ @ 1 Figure 20: Side Marking Example for Approved I/O Modules According to ATEX and IECEx Figure 21: Text Detail –...
  • Page 39: Table 15: Description Of Marking Example For Approved I/O Modules According To Atex And Iecex

    WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Table 15: Description of Marking Example for Approved I/O Modules According to ATEX and IECEx Printing on Text Description TÜV 07 ATEX 554086 X Approving authority and certificate numbers IECEx TUN 09.0001 X...
  • Page 40: Figure 22: Side Marking Example For Approved Ex I I/O Modules According To Atex And Iecex

    750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 88.8 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der Ex-i- und IEC-Ex-i-zug elas senen Bus klemmen gemäß C ENELEC und IEC _2013 @ 14\mod_1360569320118_21.doc x @ 111298 @ @ 1 Figure 22: Side Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx.
  • Page 41 WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Table 16: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx Inscription Text Description TÜV 07 ATEX 554086 X Approving authority and certificate numbers IECEx TUN 09.0001X...
  • Page 42: Table 16: Description Of Marking Example For Approved Ex I I/O Modules According To Atex And Iecex

    Use in Hazardous Environments WAGO-I/O-SYSTEM 750 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Table 16: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx Gases Equipment group: All except mining 3(1)G Category 3 (Zone 2) equipment containing a safety...
  • Page 43: Marking For America According To Nec 500

    750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 88.10 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Kennz eichnung für Ameri ka gemäß N EC 500 - Übersc hrift 3 @ 3\mod_1224158423187_21.doc x @ 24188 @ 3 @ 1 7.1.2...
  • Page 44: Installation Regulations

    WAGO-I/O-SYSTEM 750 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 88.13 /Alle Serien (Allgemeine M odul e)/Ei ns atz i n Ex-Bereic hen/Errichtungsbes timmungen - Ü bersc hrift 2 @ 3\mod_1232453624234_21.doc x @ 26370 @ 2 @ 1 Installation Regulations Pos : 88.14 /Alle Serien (Allgemeine M odul e)/Ei ns atz i n Ex-Bereic hen/Errichtungsbes timmungen Ei nleitung_2013 @ 14\mod_1360582328318_21.doc x @ 111371 @ @ 1...
  • Page 45: Special Conditions For Safe Use (Atex Certificate Tüv 07 Atex 554086 X)

    Pos : 88.16 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 07 ATEX 554086_X_2013_2 @ 15\mod_1368620071975_21.doc...
  • Page 46: Special Conditions For Safe Use (Atex Certificate Tüv 12 Atex 106032 X)

    Pos : 88.18 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 12 ATEX 106032x_2013_2 @ 15\mod_1368620479454_21.doc...
  • Page 47: Special Conditions For Safe Use (Iec-Ex Certificate Tun 09.0001 X)

    Pos : 88.20 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 09.0001 X_2013_2 @ 15\mod_1368620660911_21.doc...
  • Page 48: Special Conditions For Safe Use (Iec-Ex Certificate Iecex Tun 12.0039 X)

    Pos : 88.22 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 12.0039 X_2013_2 @ 15\mod_1368620821493_21.doc...
  • Page 49: Special Conditions For Safe Use According To Ansi/Isa

    Use in Hazardous Environments 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 88.24 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Errichtungsbesti mmung en AN SI ISA 12.12.01_2013_2 @ 15\mod_1368620942842_21.doc x @ 119794 @ 3 @ 1 7.2.5 Special Conditions for Safe Use According to ANSI/ISA 12.12.01...
  • Page 50: List Of Figures

    WAGO-I/O-SYSTEM 750 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 90 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1 List of Figures Figure 1: View .......................
  • Page 51: List Of Tables

    WAGO-I/O-SYSTEM 750 List of Tables 750-517 2DO 230V AC 1.0A/ Relay 2CO/ Potential Free Pos : 92 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Number Notation ..................
  • Page 52 Pos : 94 /D okumentation allgemei n/Einband/Einband H andbuc h - Leers eite für durc h 2 teilbar e Seitenzahl (Standar ddr uc k) @ 3\mod_1219230851078_0.doc x @ 21123 @ @ 1 Pos : 95 /D okumentation allgemei n/Einband/Einband H andbuc h - R üc kseite 2015 @ 9\mod_1285229376516_21.doc x @ 64944 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 •...

This manual is also suitable for:

Wago-i/o-system 750

Table of Contents