Configuring Via The Web-Based Management System (Wbm) - WAGO -I/O-SYSTEM 750 Manual

150 Configuring via the Web-Based Management System (WBM) WAGO-I/O-SYSTEM 750
10 Configuring via the Web-Based Management
System (WBM)
An internal file system and an integrated Web server can be used for
configuration and administration of the system. Together, they are referred to as
the Web-based Management System (WBM).
The HTML pages saved internally provide you with information about the
configuration and status of the fieldbus node. In addition, you can also change
the configuration of the device here.
You can also save HTML pages created yourself via the implemented file
system.
Always restart after making changes to the configuration!
The system must always be restarted for the changed configuration settings to
take effect.
1. To open the WBM, launch a Web browser (e.g., Microsoft Internet Explorer
or Mozilla Firefox).
2. Enter the IP address of the fieldbus coupler/controller in the address bar.
3. Click [Enter] to confirm.
The start page of WBM loads.
4. Select the link to the desired WBM page in the left navigation bar.
A login dialog appears.
5. Enter your user name and password in the query dialog (default: user =
"admin", password = "wago" or user = "user", password = "user").
The corresponding WBM page is loaded.
6. Make the desired settings.
Press [SUBMIT] to confirm your changes or press [UNDO] to discard the
7.
changes.
8. Restart the system to apply the settings (WBM page "Security", button
[Software Reset]).
Manual
1.5.0
750-882 Media Redundancy ETHERNET Controller