Pulse Width Modules; Table 448: Counter Modules 750-638, 753-638 - WAGO -I/O-SYSTEM 750 Manual

384 I/O Modules
Output Process Image
Instance
n
And the specialty modules represent 1x6 bytes output data and seize 1 Instance
in Class (0x68).
750-638,
753-638
The above Counter Modules have a total of 6 bytes of user data in both the Input
and Output Process Image (4 bytes of counter data and 2 bytes of
control/status). The two counter values are supplied as 16 bits. The following
tables illustrate the Input and Output Process Image, which has a total of 4 words
mapped into each image. Word alignment is applied.

Table 448: Counter Modules 750-638, 753-638

Input Process Image
Instance
n
n+1
The specialty modules represent 2x3 bytes input data and seize 2 Instances in
Class (0x67).
Output Process Image
Instance
n
n+1
And the specialty modules represent 2x3 bytes output data and seize 2 Instances
in Class (0x68).
13.3.5.2

Pulse Width Modules

750-511, (and all variations /xxx-xxx)
The above Pulse Width modules have a total of 6 bytes of user data in both the
Input and Output Process Image (4 bytes of channel data and 2 bytes of control/
status). The two channel values are supplied as 16 bits. Each channel has its
own control/status byte. The following table illustrates the Input and Output
Process Image, which has a total of 4 words mapped into each image. Word
alignment is applied.
Manual
1.5.0
750-882 Media Redundancy ETHERNET Controller
Byte Destination
High Byte
-
D1
D3
Byte Destination
High Byte Low Byte
-
D1
-
D3
Byte Destination
High Byte Low Byte
-
D1
-
D3
WAGO-I/O-SYSTEM 750
Low Byte
C
D0 Counter Setting Value of Counter 1
D2 Counter Setting Value of Counter 2
S0 Status byte of Counter 1
D0 Counter Value of Counter 1
S1 Status byte of Counter 2
D2 Counter Value of Counter 2
C0 Control byte of Counter 1
D0 Counter Setting Value of Counter 1
C1 Control byte of Counter 2
D2 Counter Setting Value of Counter 2
Description
Control byte
Description
Description