Module Configuration; Hex ); Table 276: Analog Output Point Extended; Table 277: Module Configuration - WAGO -I/O-SYSTEM 750 Manual

304 Fieldbus Communication
Common Services

Table 276: Analog Output Point Extended 3 (74

Service
code
0E
hex
10
hex

12.3.5.29 Module Configuration (80

Instance 0 (Class Attributes)

Table 277: Module Configuration (80

Attribute ID Access
1
2
Instance 1 ... 255 (Clamp 0 up to 254)

Table 278: Module Configuration (80

Attribute ID Access
1
Common Services

Table 279: Module Configuration (80

Service
code
0E
hex
Manual
1.5.0
750-882 Media Redundancy ETHERNET Controller
Service available Service name
Class Instance
Yes Yes Get_Attribute_Single Supplies contents of the appropriate
No Yes Set_Attribute_Single
)
hex
) – Class
hex
Name
Get Revision
Get Max Instance
) – Instance 1...255
hex
Name
Get ModulDescription
) – Common service
hex
Service available Service name
Class Instance
Yes Yes Get_Attribute_Single Supplies contents of the appropriate
WAGO-I/O-SYSTEM 750
) – Common service
hex
Description
attribute
Modifies an attribute value
Data type Description
UINT Revision of this object
UINT Max. number of instances
Data type Description
WORD Description of connected modules
(module 0 = coupler/controller)
Bit 0: Module has inputs
Bit 1: Module has outputs
Bit 8-14: Data width internally in
bit 15: 0/1 Analog/digital
module
For analog modules, bits 0-14
identify the module type, e.g., 401
for module 750-401
Description
attribute
Default
value
1 (0x0001)
-
Default
value
-