Explanation Of The Table Headings In The Object Descriptions; Identity; Hex; Table 190: Explanation Of The Table Headings In The Object Descriptions - WAGO -I/O-SYSTEM 750 Manual

270 Fieldbus Communication
12.3.5.3

Explanation of the Table Headings in the Object Descriptions

Table 190: Explanation of the table headings in the object descriptions

Table heading
Attribute ID
Access
NV
Name
Data type
Description
Default value
12.3.5.4

Identity (01

The "Identity" class provides general information about the fieldbus
coupler/controller that clearly identifies it.
Instance 0 (Class Attributes)

Table 191: Identity (01

Attribute ID
1
2
3
4
Manual
1.5.0
750-882 Media Redundancy ETHERNET Controller
Description
Integer value which is assigned to the corresponded attribute
Set:
The attribute can be accessed by means of Set_Attribute services.
Response also possible with Get_Attribute service!
All the set attributes can also be accessed by means of
Get_Attribute services.
Get:
The attribute can be accessed by means of Get_Attribute services.
Get_Attribute_All:
Delivers content of all attributes.
Set_Attribute_Single:
Modifies an attribute value.
Reset:
Performs a restart.
0: Restart
1: Restart and restoration of factory settings
NV (non volatile):
The attribute is permanently stored in the controller.
V (volatile):
The attribute is not permanently stored in the controller.
Without specifying, the attribute is not saved!
If this column is missing, all attributes have the type V
(volatile).
Designation of the attribute
Designation of the CIP data type of the attribute
Short description for the Attribute
Factory settings
)

hex

) – Class
hex
Acces Name
s
Get Revision
Get Max Instance
Get Max ID number of
class attributes
Get Max ID number of
instance attribute
WAGO-I/O-SYSTEM 750
Data type Description
UINT Revision of this object
UINT Maximum instance
UINT Maximum number of
class attributes
UINT Maximum number of
instance attributes
Default value
1 (0x0001)
1 (0x0001)
0 (0x0000)
0 (0x0000)