Reasons For Failed Ip Address Assignment - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
8.2.5.5

Reasons for Failed IP Address Assignment

• The PC on whom the BootP server is running is not located in the same
subnet as the fieldbus controller; i.e., the IP addresses do not match.
Example:
Sub net mask:
controllers)
PC IP:
Fieldbus controller IP: 192.168.1.200
Due to the sub net mask, the first 3 digits of the IP addresses must match.
• PC and/or controller is/are not linked to the ETHERNET
• Poor signal quality (use switches or hubs)
255.255.255.0 (default value for fieldbus
192.168.2.100
Commissioning 117
Manual
1.5.0