Table 45: Wbm Page "Snmp V3 - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750 Configuring via the Web-Based Management System (WBM) 169
750-882 Media Redundancy ETHERNET Controller

Table 45: WBM Page "SNMP V3"

SNMP v3 (user based)
Entry
1. User / 2. User
Authentification Type
Security
Authentification
Name
Authentification Key
Privacy Enable
Privacy Key
Notification/
Trap enable
Notification Receiver
IP
Two independent SNMPv3 users can be defined and activated via the WBM
page (user 1 and user 2).
Value Description
(Example)
Activating user 1 or 2

activate 
Deactivating user 1 or 2


None

None

MD5
None 
SHA1

None 
Enter the name, if the "authentification type" MD5 or
Security Name
SHA1 has been selected
Authentification Enter the password with at least 8 characters, if
Key "authentification type" MD5 or SHA1 has been selected
Activate the DES encryption of the data


DES
Deactivate the DES encryption of the data

Enter the password of at least 8 characters in the
Privacy Key
encryption with DES
Activate the notification traps of the SNMP version 3


V3
Deactivate the notification traps of the SNMP

version 3
192.168.1.10 IP address of the notification manager
No encryption of the
MD5  SHA1 
authentication
Encryption of the

MD5 SHA1 
authentication with MD5
Encryption of the

MD5  SHA1
authentication with SHA1
Manual
1.5.0