WAGO -I/O-SYSTEM 750 Manual page 186

186 Configuring via the Web-Based Management System (WBM) WAGO-I/O-SYSTEM 750
Table: WBM Page "PLC"
PLC Features
Function
I/O
configu-
ration
Manual
1.5.0
750-882 Media Redundancy ETHERNET Controller
Default Description
Activate, if the write authorizations must be assigned to
the outputs of all bus terminals based on an existing
file "ea-config.xml".
Here, note whether a control system configuration has
already been created and, if so, whether this

configuration is correct or incorrect (see the following
table).
The current process values are displayed on the
website "IO config", in addition to the displayed data
channels.
Disable, if the write authorizations must be assigned to
the outputs of all bus terminals of the PLC
Here, note whether a control system configuration has

already been created and, if so, whether this
configuration is correct or incorrect (see the following
table).
Compatible

handling for
ea-config.xml
No control system
configuration has
been created in the
project
Correct control
system configuration
has been created in
the project
Incorrect control
system configuration
has been created in
the project
Activate to also display the current process values on
Insert

the WBM page "IO config" for the displayed data
monitoring
channels.

entries into
Disable, if no process values must be displayed on the
ea-config.xml

WBM page "IO config".
I/O configuration I/O configuration
(function activated) (function deactivated,
standard setting):
Writing privileges to the The outputs for all
outputs of modules are
all modules are assigned to the PLC.
assigned on the Any ea-config.xml file
basis of an existing ea- that may already be
config.xml. present is ignored and
overwritten.
The ea-config.xml file
must be
completely error-free;
otherwise the
writing privileges for all
modules
will be assigned to the
standard
fieldbus.
Writing privileges to the module outputs is taken
from the control system
configuration. A corresponding ea-config.xml file is
generated in the file
system.
The standard fieldbus is granted writing privileges
to the outputs of all the
modules.