Overview - WAGO 765-1505/100-000 Product Manual

765-1505/100-000

Overview

3
The product is part of the WAGO I/O System Field 765. It is intended for industrial use
within an ETHERNET network and communicates with a central controller and/or directly
with the control level, if necessary. Several sensors/actuators can be connected to the
product for connection in the field level. The product electronics are protected from envi-
ronmental influences by the completely encapsulated product housing.
The product has a metal housing and is suitable for screw mounting on a carrier.
Function Overview
• ETHERNET TCP/IP communication to the higher-level controller
– Cyclic I/O data
– Configuration and parameterization via EtherNet/IP
• Bluetooth
and a mobile device
• WAGO I/O Field Webserver: Integrated Webserver with the configuration, parameteri-
zation, diagnostic, testing and firmware update functions
• Forcing function: Forcing output signals, simulating input signals
• Measured values by channel:
– Output and supply current
– Supply voltage
– Temperature measurement
• Monitoring functions by channel:
– Maximum current
– Over and undervoltage
– Over and undertemperature
– Line break detection
• Total current monitoring
• Protective functions: Shutdown of the switching or supply outputs if the maximum cur-
rent at a pin is exceeded
• Integrated OPC UA server
• 8 ports: 8 digital inputs / outputs
• Pin 4 can be configured as a digital input or digital output
• Port X01 ... X04 supplied by 1L
• Port X05 ... X08 supplied by 2L
Product manual | Version: 2.0.0
8DIO FLD EI DC 24V 2.0A
®
interface for diagnostics and configuration using the WAGO I/O Field app
Overview
13