Overview - WAGO 765-1103/100-000 Manual

765-1103/100-000

Overview

3
The module is part of the WAGO I/O System Field 765. It is intended for industrial use
within a PROFINET network and communicates with a central controller and/or directly
with the control level if applicable. Several sensors can be connected to the product for
connection to the field level. The device electronics are protected from environmental in-
fluences by the completely encapsulated device housing.
The module has a metal housing and is suitable for screw mounting on a rack.
Function Overview
• PROFINET communication with the higher-level controller
– Cyclic I/O data
– Configuration and parameterization via PROFINET
– Diagnostics and alarms
• Bluetooth
and a mobile device
• WAGO I/O Field Webserver: integrated Webserver with configuration, parameteriza-
tion, diagnostic, testing and firmware update functions
• Forcing function: simulating input signals
• Measured values by channel:
– Supply current
– Supply voltage
– Temperature measurement
• Monitoring functions by channel:
– Maximum current
– Over- and undervoltage
– Over- and undertemperature
– Line break detection
• Total current monitoring
• Protective functions: shutdown of a pin when the maximum current on this pin is ex-
ceeded
• Integrated OPC UA server
• 8 ports with two channels each: 16 digital outputs
Product manual | Version: 2.2.0
16DO FLD PN DC 24V 2.0A
®
interface for diagnostics and configuration using the WAGO I/O Field app
Overview
13