Overview - WAGO 765-1205/100-000 Product Manual

765-1205/100-000

Overview

3
The module is part of the WAGO I/O System Field 765. It is intended for industrial use
within an EtherCAT
level. Several sensors/actuators can be connected to the device for connection on the
field level. The device electronics are protected from environmental influences by the
completely encapsulated device housing.
The product has a metal housing and is suitable for screw mounting on a rack.
Function Overview
• EtherCAT
– Cyclic I/O data
– Configuration and Parameterization via EtherCAT
– Emergency Telegrams
• Bluetooth
and a mobile device
• WAGO I/O Field Webserver: integrated Webserver, accessible via "Ethernet over
EtherCAT (EoE)", with the following functions: configuration, parameterization, diag-
nostics, testing and firmware update
• Forcing function: Forcing output signals, simulating input signals
• Measured values by channel:
– Output and supply current
– Supply voltage
– Temperature measurement
• Monitoring functions by channel:
– Maximum current
– Over and undervoltage
– Over and undertemperature
– Line break detection
• Total current monitoring
• Protective functions: Shutdown of the switching or supply outputs if the maximum cur-
rent at this pin is exceeded.
• Integrated OPC UA server
• 8 ports: 8 digital inputs / outputs
• Pin 4 can be configured as a digital input or digital output
• Port X01 ... X04 supplied by 1L
• Port X05 ... X08 supplied by 2L
Product manual | Version: 2.0.0
8DIO FLD EC DC 24V 2.0A
®
network and communicates with a central controller on the control
®
communication with the higher-level controller
®
interface for diagnostics and configuration using the WAGO I/O Field app
Overview
®
13