Overview - WAGO I/O System 750 Manual

22

Overview

Overview
3
The controller 750-8210/040-000 (PFC200; G2; 4ETH; XTR) is an automation
device that can perform control tasks of a PLC. It is suitable for mounting on a
DIN rail and stands out on account of its various interfaces.
This controller is specifically designed for rail and marine applications.
You can connect all available I/O modules of the WAGO I/O System 750 XTR to
the controller, enabling it to internally process analog and digital signals from the
automation environment, or to supply these signals to other devices via one of
the available interfaces.
Automation tasks can be executed in all IEC 61131-3-compatible languages with
the CODESYS V3 programming system.
The implementation of the task processing in the runtime system for Linux
been optimized with real-time extensions in order to provide maximum
performance for automation tasks. Web visualization is also provided as
visualization in addition to the development environment.
For IEC-61131-3 programming in CODESYS applications, the controller provides
32 MB of program memory (flash), 128 MB of data memory (RAM) as well as
128 kB of retentive memory (retain and flag variables in an integrated NVRAM).
The controller has a slot for an SD card. The SD card can be used to transfer
device parameters, boot projects and other files from one controller to another.
The SD card can be accessed via FTP as an additional drive.
Memory card is not included in the scope of delivery!
Note, the controller is delivered without memory card.
To use a memory card, you must order one separately. The controller can also
be operated without memory card expansion, the use of a memory card is
optional.
</dg_
Only use recommended memory cards!
Use only the SD memory cards available from WAGO (item No. 758-879/000-
001 and 758-879/000-2108) as these are suitable for industrial applications
subjected to environmental extremes and for use in this device.
Compatibility with other commercially available storage media cannot be
guaranteed.
Four ETHERNET interfaces and the integrated, configurable switch enable wiring
in all necessary configurations from one common network where all four ports
share a common IP address up to four separate networks where each port has
its own IP address.
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR
®
has