Working With The Job Queues - Stratasys Fortus 360mc User Manual

WORKING WITH THE JOB QUEUES

There are two, separate, job queues available on the 360mc/400mc - the Job Queue; and the Sample Job
Queue. To access these queues:
1. From the Main Menu select
2. Select
Show Job Queue
Note: The total number of jobs currently in the queue is displayed at the end of
the line.
A. The
Show Job Queue
PC workstation. (For information on Insight, see
•
Up to four jobs can be viewed on the display panel.
•
If the job queue contains more than four jobs, use the arrow keys to scroll the display up or down
through the available jobs.
•
Use the arrow keys to select a job in the queue.
•
Press the Enter key to build a selected job.
•
Press the <.> (dot) key to show the details of the selected job.
•
Press 1 to move a selected job to the top of the queue.
•
Press DEL to delete a selected job from the queue.
•
Press 9 to copy the job to the sample queue (job queue only).
B.
Show Sample Job Queue
360mc/400mc comes with several sample job files permanently installed on the system.
These files cannot be deleted (For the Sample Job Queue the (DEL) key does not delete
pre-installed sample job files).
•
Press the <.> (dot) key to toggle between all sample jobs and only jobs for the current system
configuration.
•
Up to four jobs can be viewed on the display panel.
•
Use the arrow keys to scroll up or down through the available sample jobs, or to select a job in the
sample queue.
•
Press the Enter key to build the selected job.
•
Additional files can be stored in the sample job queue from the standard job queue (press 9 to copy a
job from the standard job queue into the sample queue).
•
User-added sample job files can be deleted by pressing the DEL key.
and press ENTER.
Build Job
>Build Job..
Operator Control..
Modeler Status..
Maintenance..
, or
Show Sample Job Queue
Build Next Job: motor housing <E>
Build Last Job:
>Show Job Queue..
Show Sample Job Queue..
menu - contains files downloaded from the Insight application on your
menu - contains files that are helpful for testing the system. The
|*Tips: Model T16
|* Support T16
, and press ENTER.
rotor <E>
(6 Jobs)
(jobs for cfg)
"5 Operating Insight" on page
53
62.)