Working With The Job Queues - Stratasys FORTUS 360mc Manual

FORTUS 360mc/400mc and FDM 360mc/400mc User Guide

Working with the Job Queues

1.
There are two, separate, job queues available on the 360mc/400mc -
the Job Queue; and the Sample Job Queue.
2.
From the Main Menu select
>Build Job..
Operator Control..
Modeler Status..
Maintenance..
3.
Select
Show Job Queue
ENTER.
Note: The total number of jobs currently in the queue is
displayed at the end of the line.
Build Next Job:
Build Last Job:
>Show Job Queue..
Show Sample Job Queue..
A.
The
Show Job Queue
Insight application on your PC workstation. (For information on
Insight, see
• Up to four jobs can be viewed on the display panel.
• If the job queue contains more than four jobs, use the arrow
keys to scroll the display up or down through the available
jobs.
• Use the arrow keys to select a job in the queue.
• Press the Enter key to build a selected job.
• Press the <.> (dot) key to show the details of the selected job.
• Press 1 to move a selected job to the top of the queue.
• Press DEL to delete a selected job from the queue.
• Press 9 to copy the job to the sample queue (job queue only).
B.
Show Sample Job Queue
testing the system. The 360mc/400mc comes with several sample
job files permanently installed on the system. These files cannot be
deleted (For the Sample Job Queue the (DEL) key does not delete
pre-installed sample job files).
• Press the <.> (dot) key to toggle between all sample jobs and
only jobs for the current system configuration.
• Up to four jobs can be viewed on the display panel.
Build Job
|*Tips: Model T16
|*
, or
Show Sample Job Queue
motor housing <E>
rotor <E>
menu - contains files downloaded from the
"Operating Insight" on
menu - contains files that are helpful for
and press ENTER.
Support T16
, and press
(6 Jobs)
(jobs for cfg)
page 5-1.)
4-29