Figure 7-14. Copy Command Confirmation Window - Bay Networks 5399 Manual

If you choose
you do not need to complete this field: skip this step and
go to step 7.
7. Select one or more RACs from the
If you need to add a RAC to the list you must return to the
window and reissue the
one RAC, you do not need to select it.
8. Enter one or more port numbers, or a range of port numbers in
the field below the
9. Click
Apply
This step triggers several operations:
• A
Confirmation
RACs whose parameter values will change.
Figure 7-14. Copy Command Confirmation Window
The message box displays status messages, and, if necessary, it lists
error messages.
• The
Reset Parameters
selected the
menu and if the parameters you are copying require Annex
Manager to reset RACs. If you did not select
Reset
Managing Remote Access Concentrators Using Annex Manager
Chapter 7
Annex Only Params
Copy command. If your list contains only
box.
Copy To
.
window appears
window
Confirm Auto Reset
Annex Manager resets RACs without notifying you.
Configuring RAC Parameters
, or
WAN Module Params
window.
Copy To
(Figure 7-14), listing the
(Figure 7-15) appears if you
option from the pull-down
Confirm Auto
,
Main
7-23